Airtac MIJ Adjustable Cylinder MIJ32X500-100S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ32X500-100S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø32mm bore and 500mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke500 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ32X500-100S
Dial in your forward end position on-site with the AirTAC MIJ32X500-100S, a round-body stainless steel mini cylinder featuring a 100 mm extend-stroke adjustment window. Rather than swapping components to hit a new target, an external stop screw lets you trim the forward stroke down from the 500 mm maximum, leaving the full retract intact. Driven by a 1/8" port and a Ø12 mm rod with an M10x1.25 male thread, it delivers substantial force for a mini format.
At 0.5 MPa this 32 mm bore generates 402.2 N of push force and 345.6 N of pull force, climbing to 563 N push at 0.7 MPa. For practical sizing, a safe working load is roughly 241 N, or a vertical lift of about 20.5 kg with a 2:1 margin. The riveted stainless barrel and rod resist mild corrosion and washdown, while fixed TPU bumper pads absorb the end-of-stroke impact. Because this SKU carries the -S suffix, a built-in piston magnet enables CMSG, DMSG or EMSG position sensing.
Airtac MIJ Adjustable Cylinder MIJ32X500-100S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ32X500-100S |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ32X500-100S
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ32X500-100S Is Used
Staged Diverting
Pushes cartons at 402.2 N to a secondary lane, using the 100 mm extend trim to hit diverter positions without changing the cylinder.
Tolerance Take-Up
Extends up to 500 mm to seat pallets, dialing the stop screw back to absorb frame variances while lifting roughly 20.5 kg vertically.
Variable Stroke Sealing
Closes a sealing jaw with 563 N at 0.7 MPa, trimming the forward end to accommodate different package heights on the same line.
Is the Airtac MIJ Adjustable Cylinder MIJ32X500-100S the Right Cylinder?
When sizing this unit against the rest of the MIJ family, the adjacent Ø25 bore yields 245.3 N of push at 0.5 MPa, whereas the larger Ø40 bore jumps to 628.3 N. Choose the 32 mm bore when your application requires that middle-ground thrust. The 100 mm external stop screw is ideal for taking up mechanical tolerances or staging feeds across a 400 to 500 mm range, letting one part number cover several intermediate stops. Note that the stop screw sets the end position but does not function as a mid-stroke lock; the piston will drift on air loss, so deploy an external rod lock or pilot check valve for held loads. Mounting options include LB foot, FA flange and TC trunnion (the SDB pivot block is not offered on this adjustable variant), and the 1/8" port uses standard PT threading.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ32X500-100S FAQ
This 32 mm bore cylinder uses a 1/8" port and delivers 402.2 N push / 345.6 N pull at 0.5 MPa, and 563 N push / 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 100 mm on-site, setting the forward end position without affecting the full retract. The -S suffix denotes a built-in piston magnet for CMSG, DMSG or EMSG sensors. The stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ32X500-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.