Airtac MIJ Adjustable Cylinder MIJ32X60-50
The AirTAC Airtac MIJ Adjustable Cylinder MIJ32X60-50 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ32X60-50
Dial in a precise forward end position on-site with the AirTAC MIJ32X60-50, a round-body stainless mini cylinder built for double-acting operation. An external stop screw lets you shorten the extend stroke by up to 50 mm, providing a usable 10-60 mm forward travel without changing the unit. The retract stroke remains full length. This riveted construction features a stainless barrel and rod, offering mild corrosion resistance for washdown or damp environments.
Delivering robust power, the 32 mm bore generates 402.2 N of push force at 0.5 MPa. This translates to a safe working load of roughly 241 N, capable of vertically lifting about 20.5 kg with a 2:1 safety margin. The unit operates at 30-800 mm/s, uses a 1/8" port, and relies on fixed TPU bumper pads to decelerate the stroke end. Note this non-ISO-6432 size cannot hold a load on air loss without an external rod lock.
Airtac MIJ Adjustable Cylinder MIJ32X60-50 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ32X60-50 |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ32X60-50
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ32X60-50 Is Used
Staged Diverting
Trim the extend stroke up to 50 mm on the fly to push varying carton sizes onto secondary lines without swapping actuators.
Variable Stop Positioning
Use the settable end stop to create adjustable mechanical deadstops for different package depths, leveraging the 402.2 N push force.
Washdown Forming
Rely on the stainless steel construction for mildly corrosive environments while dialing in the exact 10-60 mm forming depth.
Is the Airtac MIJ Adjustable Cylinder MIJ32X60-50 the Right Cylinder?
When sizing this actuator, consider the next bore down (MIJ25, 245.3 N push @0.5 MPa) for lighter tasks, or step up to the MIJ40 (628.3 N push @0.5 MPa) if your application exceeds the 241 N safe working load. The 50 mm adjustment window is invaluable for absorbing mechanical tolerances during setup or covering multiple stop positions with a single part number. Because the stop screw only trims the extend end and acts as a bumper rather than a mid-stroke lock, you must add a pilot-operated check valve to prevent drift if holding a suspended load. Mounting options include LB foot, FA flange, and TC trunnion brackets (SDB pivot-block is not available), and since this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ32X60-50 FAQ
At 0.5 MPa it provides 402.2 N push and 345.6 N pull; at 0.7 MPa it provides 563 N push and 483.8 N pull. The theoretical maximum force is 82 kgf at 1.0 MPa. This 32 mm bore unit uses a 1/8" port and a M10x1.25 male rod thread.
An external stop screw shortens the extend stroke by up to 50 mm (usable forward travel 10-60 mm), while retract remains full. It uses fixed TPU bumper pads to decelerate the stroke end, not an adjustable air cushion. Because this SKU lacks a magnet (-S), it cannot accept position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ32X60-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.