Airtac MIJ Adjustable Cylinder MIJ32X75-75
The AirTAC Airtac MIJ Adjustable Cylinder MIJ32X75-75 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ32X75-75
Dial in your forward end position on-site with the AirTAC MIJ32X75-75, a round-body stainless mini cylinder featuring a 75 mm extend-stroke adjustment window. An external stop screw lets you trim the forward travel anywhere within that 75 mm range, allowing one part number to cover multiple stop distances without swapping hardware. Retract travel remains at the full 75 mm. Built with a riveted stainless-steel barrel and piston rod, it handles mild corrosion and washdown environments while delivering 402.2 N of push force at 0.5 MPa.
This double-acting actuator uses a 1/8" port and a 12 mm rod with an M10x1.25 male thread. It runs at speeds from 30 to 800 mm/s and relies on fixed TPU bumper pads to decelerate the stroke end. For sizing, a safe working load is roughly 241 N, which translates to lifting about 20.5 kg vertically with a 2:1 safety margin. Because this SKU lacks the -S magnet option, it cannot accept CMSG, DMSG, or EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ32X75-75 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ32X75-75 |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ32X75-75
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ32X75-75 Is Used
Diverter Gate Positioning
Fine-tune the extend stop up to 75 mm to route varying package sizes on a washdown conveyor, using the 402.2 N push force to positively swing the gate.
Variable Depth Carton Sealing
Adjust the forward end position on-site to match different carton depths without changing cylinders, relying on the 241 N safe working load to press the sealing head.
Staged Material Ejection
Set precise ejection distances for parts of different lengths, using the stainless construction to resist coolant mist while pushing up to 20.5 kg safely.
Is the Airtac MIJ Adjustable Cylinder MIJ32X75-75 the Right Cylinder?
When sizing this 32 mm bore, compare it directly against adjacent options. Stepping down to the MIJ25 drops your 0.5 MPa push force to 245.3 N, while moving up to the MIJ40 increases it to 628.3 N. The 75 mm external adjuster is highly useful for taking up mechanical tolerances during setup or staging feeds, but remember the stop screw only sets the extend endpoint—it is not a mid-stroke lock. If your mechanism loses air, the piston will drift.
For mounting, you can use LB foot, FA flange, or TC trunnion brackets, along with CA, U, R, or CM back covers, but the SDB pivot block is not available on this adjustable variant. Because this specific configuration ships without a magnet, position sensing is not possible; you would need the -S variant to enable CMSG, DMSG, or EMSG switches. To hold a load securely on air loss, add an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ32X75-75 FAQ
At 0.5 MPa it provides 402.2 N push and 345.6 N pull. At 0.7 MPa it provides 563 N push and 483.8 N pull. The theoretical maximum force is 82 kgf at 1.0 MPa. This 32 mm bore model uses a 1/8" air port and a 12 mm rod.
An external stop screw shortens the extend stroke by up to 75 mm on-site, letting you set the exact forward position without changing the cylinder; retract remains full. This SKU has no magnet and cannot take sensors, but fixed TPU bumpers decelerate the stroke ends. The screw is not a mid-stroke lock, so use an external rod lock if you need to hold a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ32X75-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.