Airtac MIJ Adjustable Cylinder MIJ32X80-10S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ32X80-10S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø32mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ32X80-10S
Dial in a precise forward end position on the factory floor with the AirTAC MIJ32X80-10S, a round-body stainless mini cylinder featuring a 10 mm extend-stop adjustment window. Rather than swapping components to hit a new forward position, an external screw trims the nominal 80 mm extend stroke down to 70 mm on site, while retract remains full. Built as a double-acting actuator, it delivers 402.2 N of push force at 0.5 MPa.
The riveted stainless-steel barrel and Ø12 mm piston rod supply mild corrosion resistance for washdown environments, and the built-in magnet (-S) directly supports CMSG, DMSG, and EMSG position switches. Because this is a Ø32 mm bore, it is a non-ISO-6432 round-body mini cylinder. The 1/8" port feeds air efficiently, and fixed TPU bumper pads decelerate the stroke end. For sizing context, a safe working load sits around 241 N (roughly 60% of the 0.5 MPa push figure), translating to a vertical lift capacity of about 20.5 kg with a 2:1 safety margin.
Airtac MIJ Adjustable Cylinder MIJ32X80-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ32X80-10S |
|---|---|
| Series | MIJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ32X80-10S
| MIJ | round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ32X80-10S Is Used
Staged Ejection Diverter
Trim the 80 mm extend stroke by up to 10 mm to push parts of varying sizes onto a secondary belt without repositioning the cylinder mount.
Carton Flap Tucking
Leverage the 402.2 N push force to tuck heavy cardboard flaps, fine-tuning the forward stop to accommodate different box heights on the fly.
Multi-Stop Clamping Station
Use the stainless build and 1/8" port to clamp raw metal blanks in a washdown cell, adjusting the end position in seconds for mixed tooling batches.
Is the Airtac MIJ Adjustable Cylinder MIJ32X80-10S the Right Cylinder?
When sizing this actuator, compare it against adjacent bores: a Ø25 mm MIJ provides 245.3 N push @0.5 MPa, while a Ø40 mm MIJ jumps to 628.3 N. The 10 mm external stop screw is ideal for taking up mechanical tolerances or staggering part ejection across a fixture. Keep in mind the stop screw sets the end position but acts purely as a bumper; it is not a mid-stroke lock. If the assembly must hold a load during air loss, install an external rod lock or pilot check valve, as the piston will drift. Mount this cylinder via LB foot, FA flange, or TC trunnion (the SDB pivot block is unavailable for this adjustable variant), and leverage the -S magnet for electronic or reed sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ32X80-10S FAQ
This double-acting cylinder uses a 1/8" air port and generates 402.2 N push / 345.6 N pull at 0.5 MPa, and 563 N push / 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm (usable range 70-80 mm), but retract remains full. The -S suffix means a piston magnet is built-in for CMSG, DMSG, or EMSG sensors. The stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ32X80-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.