Airtac MIJ Adjustable Cylinder MIJ8X35-10S
The AirTAC Airtac MIJ Adjustable Cylinder MIJ8X35-10S is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø8mm bore and 35mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ8 mm
- Stroke35 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ8X35-10S
Dialing in a precise forward end position on-site is effortless with this stainless-steel, round-body mini cylinder. As the adjustable-extend version of the MI series, the external stop screw trims the forward stroke by up to 10 mm, letting you set a usable extend range of 25 to 35 mm without changing the unit. The retract stroke remains full length.
Built with a stainless barrel and piston rod, it handles mild washdowns and corrosion-prone environments. It conforms to the ISO 6432 mounting interface for Ø8 bores and includes a built-in magnet (-S) for CMSG, DMSG, or EMSG sensors. Operating at 0.5 MPa, it delivers 25.1 N of push force, translating to a safe working load of about 15 N or a 1.3 kg vertical lift with a 2:1 margin.
Airtac MIJ Adjustable Cylinder MIJ8X35-10S Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ8X35-10S |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø8 mm |
| Stroke | 35 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø8mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 25 N | 19 N |
| 0.7 MPa | 35 N | 26 N |
| Max (@1.0 MPa) | 5 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ8X35-10S
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 8 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ8X35-10S Is Used
Micro-Clamp Positioning
Fine-tune the 25.1 N push stroke by up to 10 mm to accommodate different part thicknesses in a small machining fixture without swapping cylinders.
Light-Duty Diverter
Set a precise extend stop to deflect small, lightweight packages on a conveyor, adjusting the stroke on-site to match varying product widths.
Staged Component Feeding
Use the adjustable forward end position to push delicate electronic components exactly 28 mm out of a tube, relying on the fixed TPU bumper to soften the stop.
Is the Airtac MIJ Adjustable Cylinder MIJ8X35-10S the Right Cylinder?
When sizing this 8 mm bore, stepping down is not an option as it is the smallest available. If you need more push, the next size up is the Ø16 bore, which jumps significantly to 100.5 N of push at 0.5 MPa. The 10 mm adjustment window is highly useful for taking up mechanical tolerances during setup or staging feeds, allowing one part number to cover several intermediate stops. Air ports are M5x0.8.
Keep in mind that the stop screw only sets the end position; it is not a mid-stroke lock. The piston will drift on air loss, so add an external rod lock or pilot check valve if you need to hold a load vertically. For mounting, you can use LB foot, FA flange, or TC trunnion brackets, but the SDB pivot block is not available on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ8X35-10S FAQ
This double-acting cylinder features an M5x0.8 air port and a 4 mm piston rod. At 0.5 MPa it provides 25.1 N of push and 18.8 N of pull. At 0.7 MPa, push is 35.2 N and pull is 26.4 N. The theoretical maximum force is 5.1 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 10 mm, allowing you to dial in the exact forward position; the retract stroke remains full. The -S suffix means it has a built-in piston magnet for use with CMSG, DMSG, or EMSG sensors. It uses fixed TPU bumper pads, not an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ8X35-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.