Airtac MIJ Adjustable Cylinder MIJ8X60-30
The AirTAC Airtac MIJ Adjustable Cylinder MIJ8X60-30 is a genuine double acting, adjustable stroke round-body mini air cylinder with a Ø8mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ8 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIJ Adjustable Cylinder MIJ8X60-30
Dial in a precise forward end position on-site with the AirTAC MIJ8X60-30, a round-body stainless steel mini cylinder that lets you shorten the extend stroke by up to 30 mm via an external stop nut. Because the adjuster trims only the extend end, you can cover several stop distances with a single part number while retaining the full 60 mm retract. Built with a riveted stainless barrel and Ø4 mm rod, it handles mild washdown and corrosion exposure.
Operating at 0.15-1.0 MPa with an M5x0.8 port, this double-acting ISO 6432 unit delivers 25.1 N of push force at 0.5 MPa. That translates to a safe working load of roughly 15 N, or a vertical lift capacity of about 1.3 kg with a 2:1 safety margin. Fixed TPU bumper pads decelerate the stroke ends, and since this specific SKU lacks the -S magnet, it cannot host CMSG, DMSG, or EMSG sensors.
Airtac MIJ Adjustable Cylinder MIJ8X60-30 Technical Specifications
| Model | Airtac MIJ Adjustable Cylinder MIJ8X60-30 |
|---|---|
| Series | MIJ ISO 6432 mini cylinder |
| Bore size | Ø8 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø8mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 25 N | 19 N |
| 0.7 MPa | 35 N | 26 N |
| Max (@1.0 MPa) | 5 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIJ Adjustable Cylinder MIJ8X60-30
| MIJ | ISO 6432 round-body mini cylinder (adjustable-stroke). |
|---|---|
| 8 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIJ Adjustable Cylinder MIJ8X60-30 Is Used
Micro-Clamp Actuation
Provides a 15 N safe working load to secure delicate electronic components, using the 30 mm extend adjustment to dial in the exact clamping depth without crushing parts.
Light-Duty Diverter Gate
Sorts small lightweight packets on a conveyor by extending a gate pin, with the adjustable stop allowing quick changeover for different package sizes.
Staged Parts Ejection
Pushes small molded parts out of a fixture at 25.1 N, using the shortened extend stroke to eject into a specific chute without repositioning the cylinder body.
Is the Airtac MIJ Adjustable Cylinder MIJ8X60-30 the Right Cylinder?
When sizing this 8 mm bore, stepping up to the MIJ12X60-30 provides a substantial force jump to 56.5 N push at 0.5 MPa, while no smaller standard MIJ bore exists below it. The 30 mm adjustment window is ideal for taking up mechanical tolerances during setup or staging feeds, letting you fine-tune the extend position without swapping hardware. Mount using standard ISO 6432 brackets like LB foot, FA flange, or TC trunnion, noting that the SDB pivot block is not offered for this adjustable variant.
Keep in mind that the stop screw sets the end position but does not function as a mid-stroke lock. If air pressure drops, the piston will drift, as the bumper pads only soften the stroke end rather than holding the load. For applications requiring a held load, integrate an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIJ Adjustable Cylinder MIJ8X60-30 FAQ
This double-acting cylinder features an M5x0.8 port and a Ø4 mm rod. It generates 25.1 N push and 18.8 N pull at 0.5 MPa, increasing to 35.2 N push and 26.4 N pull at 0.7 MPa, with a theoretical maximum of 5.1 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 30 mm on-site, allowing a usable extend range of 30-60 mm, while retract remains full. The screw is not a mid-stroke lock; the piston drifts on air loss, and because this SKU lacks the -S magnet, it cannot accept position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIJ Adjustable Cylinder MIJ8X60-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.