Airtac MTF Mini Cylinder MTF32X150CM
The AirTAC Airtac MTF Mini Cylinder MTF32X150CM is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø32mm bore and 150mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke150 mm
- Port size1/4"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MTF Mini Cylinder MTF32X150CM
Delivering 266.8 N of net pull force at 0.5 MPa, this AirTAC MTF32X150CM mini cylinder is engineered for single-acting tension and fail-safe-open duties. The internal spring actively pushes the 12 mm rod to the extended rest position, while supplying air to the 1/4 inch port retracts it. Because the spring constantly drives outward, any loss of air pressure forces the rod back out, making it ideal for doors or guards that must open during an outage. The riveted aluminium covers and SUS304 stainless barrel supply reliable mild-corrosion and washdown resistance.
Built to JIS standards, this round-body unit is purposefully shorter than an equivalent ISO 6432 cylinder, saving valuable machine space without sacrificing the full 150 mm stroke. It relies on fixed TPU bumper pads for end-of-stroke deceleration rather than an adjustable air cushion. For sizing tasks, the 266.8 N pull at 0.5 MPa translates to a safe working load of roughly 160 N, or a vertical lift capacity of about 13.6 kg when using a 2:1 safety margin. Note that this specific SKU lacks a magnet and cannot support position sensing; you must specify the -S variant to use CMSG, DMSG, or EMSG switches.
Airtac MTF Mini Cylinder MTF32X150CM Technical Specifications
| Model | Airtac MTF Mini Cylinder MTF32X150CM |
|---|---|
| Series | MTF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 266.8 N |
| 0.7 MPa | 405.0 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac MTF Mini Cylinder MTF32X150CM
| MTF | JIS-standard round-body mini cylinder (single-acting pull, spring-return). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MTF Mini Cylinder MTF32X150CM Is Used
Fail-Safe Door Opening
Uses the internal spring to force a guard door open and hold it extended during a compressed air failure, applying 266.8 N of outward thrust for safe operator access.
Tensioning Mechanism
Pulls a belt or filament tight with 405 N of force at 0.7 MPa, releasing the tension smoothly when air is removed and the spring returns the rod.
Vertical Retract Lifting
Lifts a 13.6 kg load vertically via a pulling hook, relying on air to retract the rod against gravity while the spring safely lowers the load on shutdown.
Is the Airtac MTF Mini Cylinder MTF32X150CM the Right Cylinder?
When sizing this 32 mm bore, evaluate your tension requirements against its 266.8 N pull at 0.5 MPa (405 N at 0.7 MPa). If your load is lighter, stepping down to the MTF25 provides 153.6 N of pull, whereas heavier pulling tasks require the MTF40, which generates 434.8 N at 0.5 MPa. Remember that a minimum operating pressure of 0.2 MPa is required to overcome the internal spring and retract the rod.
This model features a CM round-end back cover and supports LB foot, FA flange, SDB pivot, and TC trunnion mounts. Because this exact configuration ships without a magnet, it cannot accept CMSG, DMSG, or EMSG sensors; choose the -S option if your application requires position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MTF Mini Cylinder MTF32X150CM FAQ
This 32 mm bore cylinder provides a net pull force of 266.8 N at 0.5 MPa and 405 N at 0.7 MPa. It requires a minimum operating pressure of 0.2 MPa to overcome the spring, has a maximum pressure of 1.0 MPa, and uses a 1/4 inch air port.
This specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors; you need the -S variant for sensing. The spring constantly extends the rod, meaning it fails to the extended position on air loss and cannot hold a mid-stroke load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MTF Mini Cylinder MTF32X150CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.