Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-10
The AirTAC Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-10 is a double-acting pen-size mini cylinder with a rear adjuster screw that shortens the retract end of the stroke. On a Ø10mm bore it gives a nominal 160mm stroke with a 10mm fine-adjustable window — settable from 150 to 160mm, so you set the end position without changing hardware.
- BoreØ10 mm
- Nominal stroke160 mm
- Adjust window10 mm
- Effective range150–160 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-10
The AirTAC PBJ10X160-10 is a double-acting, single-rod pen-size mini cylinder with a 10 mm adjustable window. A rear M4x0.7 adjuster screw and lock nut shorten the retract end, yielding an effective stroke range of 150-160 mm. The extend end remains fixed. Output force matches a standard PB of the same bore, delivering 39.3 N push at 0.5 MPa with zero penalty for adding adjustability.
This 160 mm unit is a non-standard made-to-order stroke, exceeding the 100 mm max standard for the 10 mm bore. It features a slim SUS304 stainless body, an M5x0.8 air port, and a fixed TPU bumper at each end. Because the rod is only Ø4 mm, you should add an external guide or linear bearing for this long stroke to prevent side-load damage. Plan for a safe working load of roughly 24 N, which is about 60 percent of the theoretical force.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-10 Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-10 |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Nominal stroke | 160 mm |
| Adjustable window | 10 mm (150–160 mm) |
| Adjuster thread | M4×0.7 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 100 mm |
The adjuster shortens only the retract end; the extend end is fixed. Force is unchanged from the standard PB double-acting cylinder. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Adjusting the stroke does not change output force — these are the same values as the standard PB double-acting cylinder of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-10
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×160 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-10 Is Used
Changeover Fixtures
Dial in the exact retract distance during product changeovers without swapping hardware, tuning the stop from 150 to 160 mm directly on the machine.
Trial Stop Positioning
Set precise trial stops for delicate probing or insertion tasks, locking the M4x0.7 nut once the optimal 150-160 mm travel is found.
Variable Depth Insertion
Adjust insertion depth on the fly for different part heights, relying on the fixed TPU bumper to cushion the extend end.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-10 the Right Cylinder?
This 10 mm bore provides 39.3 N push and 33 N pull at 0.5 MPa. If you need more force, the 12 mm bore offers 56.5 N push; if you need less, you must step down to a smaller custom series. Remember that only the retract position is field-settable; the extend end is fixed. After dialing in your 150-160 mm range, re-tighten the lock nut so vibration does not drift the screw. Confirm your ordering essentials: bore, stroke, window, magnet, and mount.
Note that this 160 mm length exceeds the standard 100 mm maximum for this bore and is produced as a non-standard item. The fixed TPU bumper only decelerates the last few millimeters of travel. At mid-to-high speeds with real tooling mass, the bumper will bottom out, so meter-out the exhaust or fit an external shock absorber. A plain cylinder does not hold position on air loss, so add an external rod lock for fail-safe holding.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 150–160 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check The adjuster shortens the retract end only.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-10 FAQ
The effective stroke range is 150-160 mm. At 0.5 MPa it provides 39.3 N push and 33 N pull. At the maximum 0.7 MPa operating pressure, it provides 55 N push and 46.2 N pull.
A rear M4x0.7 screw shortens the retract end by up to 10 mm, while the extend end remains fixed. You must re-tighten the lock nut after setting your desired position to prevent vibration drift.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.