Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-100
The AirTAC Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-100 is a double-acting pen-size mini cylinder with a rear adjuster screw that shortens the retract end of the stroke. On a Ø10mm bore it gives a nominal 160mm stroke with a 100mm fine-adjustable window — settable from 60 to 160mm, so you set the end position without changing hardware.
- BoreØ10 mm
- Nominal stroke160 mm
- Adjust window100 mm
- Effective range60–160 mm
- Port sizeM5×0.8
- Acting typeDouble acting
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-100
The AirTAC PBJ10X160-100 is a double-acting, single-rod pen-size mini cylinder with a 100mm adjustable window. A rear adjuster screw (M4x0.7) shortens the retract end, giving an effective stroke range of 60-160mm. The extend end remains fixed. Output force equals a standard PB of the same bore, delivering about 39.3N push at 0.5MPa with zero force penalty for the adjustment.
This unit features a slim SUS304 stainless build and a fixed TPU bumper at each end. The 160mm nominal stroke exceeds the 100mm max standard for this 10mm bore, making it a made-to-order item. The M5x0.8 air port is standard. Because the rod is a slender Ø4mm, add an external linear bearing over this long stroke to prevent side-load damage.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-100 Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-100 |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Nominal stroke | 160 mm |
| Adjustable window | 100 mm (60–160 mm) |
| Adjuster thread | M4×0.7 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 100 mm |
The adjuster shortens only the retract end; the extend end is fixed. Force is unchanged from the standard PB double-acting cylinder. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Adjusting the stroke does not change output force — these are the same values as the standard PB double-acting cylinder of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-100
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×160 | Nominal stroke length in mm. |
| -100 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-100 Is Used
Changeover Fixtures
Dial in the retract stop during product changeovers. Set anywhere from 60 to 160mm on the machine without swapping cylinders.
Trial Stops
Fine-tune the end position for test rigs. The rear screw lets you find the exact retraction point before finalizing a hard stop.
Variable Lift Jigs
Lift light parts vertically. Plan for a safe working load of about 24N, lifting roughly 2kg with a 2:1 margin at 0.5MPa.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-100 the Right Cylinder?
Size both ways: a 12mm bore gives 56.5N push at 0.5MPa if you need more force, while a smaller option is not available in this pen series. Remember that only the retract position is field-settable; the extend end is fixed. After dialing in your 60-160mm range, re-tighten the lock nut so vibration does not drift the screw. Confirm ordering essentials: 10mm bore, 160mm stroke, 100mm window, no magnet, and mounting.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 60–160 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check The adjuster shortens the retract end only.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-100 FAQ
The effective stroke range is 60-160mm. Force equals a standard 10mm bore PB: 39.3N push and 33N pull at 0.5MPa, or 55N push and 46.2N pull at the 0.7MPa maximum.
A rear screw shortens only the retract end; the extend end is fixed. You must re-tighten the lock nut after setting to prevent vibration drift. The piston drifts on air loss, so use an external stop for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X160-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.