Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X75-75S
The AirTAC Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X75-75S is a double-acting pen-size mini cylinder with a rear adjuster screw that shortens the retract end of the stroke. On a Ø10mm bore it gives a nominal 75mm stroke with a 75mm fine-adjustable window, so you set the end position without changing hardware.
- BoreØ10 mm
- Nominal stroke75 mm
- Adjust window75 mm
- Effective range0–75 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X75-75S
The AirTAC PBJ10X75-75S is a double-acting, single-rod pen-size mini cylinder featuring a 75mm adjustable window. A rear screw with a lock nut shortens the retract end, yielding an effective stroke range of 0-75mm. The extend end remains fixed. It delivers 39.3N push and 33N pull at 0.5MPa, matching standard PB force exactly. The Ø4mm piston rod uses an M8x1.0 rod-end thread, and the body accepts M5x0.8 air ports.
This model includes a built-in magnet for electronic or reed switches. The SUS304 stainless barrel and fixed TPU bumper suit tight jigs. Plan for a safe working load of roughly 24N (about 60% of the 0.5MPa push figure) or a vertical lift of 2kg with a 2:1 margin. Because the rod is only 4mm thick, use an external guide for off-axis loads over this long stroke.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X75-75S Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X75-75S |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Nominal stroke | 75 mm |
| Adjustable window | 75 mm (0–75 mm) |
| Adjuster thread | M4×0.7 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 100 mm |
The adjuster shortens only the retract end; the extend end is fixed. Force is unchanged from the standard PB double-acting cylinder. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Adjusting the stroke does not change output force — these are the same values as the standard PB double-acting cylinder of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X75-75S
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×75 | Nominal stroke length in mm. |
| -75 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X75-75S Is Used
Changeover Fixtures
Dial in the exact retract stop during product changeovers without swapping hardware.
Trial Positioning Stops
Fine-tune the 0-75mm back position on test rigs to find the optimal depth.
Variable-Depth Insertion
Adjust insertion depth on the fly for varying part heights using the rear screw.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X75-75S the Right Cylinder?
For lower force needs, the 12mm bore gives 56.5N push at 0.5MPa; if you need less, a smaller body is required. Remember that only the retract position is field-settable—the extend end is fixed. Always re-tighten the lock nut after tuning to prevent vibration drift. Confirm your ordering code details: 10mm bore, 75mm nominal stroke, 75mm window, S magnet, and any LB or FA mount.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 0–75 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check The adjuster shortens the retract end only.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X75-75S FAQ
At 0.5MPa it provides 39.3N push and 33N pull. At the 0.7MPa maximum, it yields 55N push and 46.2N pull. The adjustable window is 75mm, giving an effective stroke range of 0-75mm.
The M4x0.7 rear screw shortens only the retract end; the extend end is fixed. Re-tighten the lock nut after setting to prevent drift. A plain cylinder does not hold position on air loss, so use an external stop for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X75-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.