Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X80-75S
The AirTAC Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X80-75S is a double-acting pen-size mini cylinder with a rear adjuster screw that shortens the retract end of the stroke. On a Ø10mm bore it gives a nominal 80mm stroke with a 75mm fine-adjustable window — settable from 5 to 80mm, so you set the end position without changing hardware.
- BoreØ10 mm
- Nominal stroke80 mm
- Adjust window75 mm
- Effective range5–80 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X80-75S
The AirTAC PBJ10X80-75S is a double-acting, adjustable-stroke pen-size mini cylinder. A rear adjuster screw (M4x0.7) with a lock nut shortens the retract end, giving an effective stroke range of 5-80 mm from a nominal 80 mm stroke. The extend end remains fixed. It features a built-in magnet for position sensing and an M5x0.8 air port.
Force is identical to a standard PB cylinder of the same bore, meaning the adjuster carries zero force penalty. It delivers 39.3 N push and 33 N pull at 0.5 MPa. The slim SUS304 stainless body and fixed TPU bumper suit tight jigs. For real work at 0.5 MPa, plan for a safe working load of about 24 N, or roughly 2 kg of vertical lift with a 2:1 margin.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X80-75S Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X80-75S |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Nominal stroke | 80 mm |
| Adjustable window | 75 mm (5–80 mm) |
| Adjuster thread | M4×0.7 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 100 mm |
The adjuster shortens only the retract end; the extend end is fixed. Force is unchanged from the standard PB double-acting cylinder. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Adjusting the stroke does not change output force — these are the same values as the standard PB double-acting cylinder of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X80-75S
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -75 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X80-75S Is Used
Changeover Fixtures
Dial in the retract stop from 5 to 80 mm during product changeovers without machining new pins or swapping hardware.
Trial Stops
Set precise end positions for prototype testing, locking the M4x0.7 adjuster nut once the ideal motion length is found.
Variable-Depth Insert
Tune the retract end on the fly for light insertion tasks, keeping the same 39.3 N push force at 0.5 MPa.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X80-75S the Right Cylinder?
Selecting this 10 mm bore model gives a 75 mm adjustment window. If you need less force, note there is no smaller PBJ bore, so look at other AirTAC mini series. If you need more thrust, the 12 mm bore provides 56.5 N push at 0.5 MPa. Remember that only the retract position is field-settable; the extend end is fixed.
After dialing in your 5-80 mm range, re-tighten the lock nut to prevent vibration drift. The Ø4 mm rod is for coaxial thrust, so add an external guide if side loads are present. Confirm your ordering essentials: bore, stroke, window, magnet S, and mount.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 5–80 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check The adjuster shortens the retract end only.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X80-75S FAQ
The effective stroke range is 5-80 mm. At 0.5 MPa it provides 39.3 N push and 33 N pull. At the maximum 0.7 MPa operating pressure, it yields 55 N push and 46.2 N pull. The air port is M5x0.8 and the rod-end thread is M8x1.0.
The rear screw shortens only the retract end; the extend end is fixed. You must re-tighten the lock nut after setting to prevent vibration drift. The built-in S magnet works with AirTAC reed or electronic switches. A plain cylinder does not hold position on air loss, so use an external stop if needed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X80-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.