Airtac PSB Single Acting Compact Cylinder PSB10X20SR
The AirTAC Airtac PSB Single Acting Compact Cylinder PSB10X20SR is a single acting, push type (spring return) pen-size mini cylinder with a Ø10mm bore and 20mm stroke. A single air port drives the push stroke; the built-in return spring resets the rod when air is released, so only one solenoid line is needed.
- BoreØ10 mm
- Stroke20 mm
- Port sizeM5×0.8
- Acting typePush, single acting
- Rod threadM8×1.0
- ReturnSpring
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PSB Single Acting Compact Cylinder PSB10X20SR
The AirTAC PSB10X20SR is a JIS pen-size single-acting push cylinder that extends via one M5x0.8 air port and retracts via an internal spring. It provides 29.8 N of net push force at 0.5 MPa and 45.5 N at 0.7 MPa. Because the spring deduction is already applied, these are your true usable figures. The fail-safe design ensures the rod pulls home automatically if air pressure drops.
This 10mm bore model features a slim SUS304 stainless steel body and a 4mm rod with an M8x1.0 end thread. An integrated piston magnet enables position sensing with reed or electronic switches. A fixed TPU bumper cushions the stroke ends. For practical sizing, plan for a safe working load of about 18 N (60% of the 0.5 MPa rating) to account for friction. Vertically, it can lift roughly 1.5 kg with a 2:1 safety margin.
Airtac PSB Single Acting Compact Cylinder PSB10X20SR Technical Specifications
| Model | Airtac PSB Single Acting Compact Cylinder PSB10X20SR |
|---|---|
| Series | PSB JIS pen-size mini cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 20 mm |
| Acting type | Single acting, push type (spring return) |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Return | Return spring (push by air) |
| Max standard stroke | Up to 60 mm |
The spring holds the rod retracted; applying air pushes the rod out, and removing air lets the spring return it. Forces below are the NET spring-deducted values from the AirTAC thrust table. Confirm against the product label before installation.
Net Push Force (Ø10mm)
| Pressure | Net push force |
|---|---|
| 0.5 MPa | 29.8 N |
| 0.7 MPa (max) | 45.5 N |
These are the usable push forces after the return spring is subtracted, taken directly from the AirTAC single-acting thrust table. Minimum operating pressure is set by the spring, so this model needs at least the lower pressure shown to move.
Model Code: Airtac PSB Single Acting Compact Cylinder PSB10X20SR
| PSB | JIS pen-size single acting, push type (spring return) mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| R / U / CB | Back cover: R axial inlet, U 90° side inlet, CB double clevis (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PB (double acting), PTB (single-acting pull), PBD (double rod), PBR (front-mount).
Where the Airtac PSB Single Acting Compact Cylinder PSB10X20SR Is Used
Part Ejection
Pushes finished metal stampings off a machining center bed using a single solenoid line, relying on the spring to retract safely during loading.
Flap Folding
Extends to tuck carton flaps on a packaging conveyor, with the fail-safe retract preventing jams if the air supply is interrupted.
Clamp Release
Acts as a compact pusher to open a lightweight pneumatic gate on an assembly jig, saving space with its stainless pen-size body.
Is the Airtac PSB Single Acting Compact Cylinder PSB10X20SR the Right Cylinder?
This 10mm bore delivers 29.8 N net push at 0.5 MPa. Stepping down to the 6mm version yields 10.6 N, while moving up to the 12mm bore provides 42.9 N. The internal return spring requires a minimum 0.2 MPa before motion begins, holding the rod safely retracted on air loss. Confirm your ordering essentials: 10mm bore, 20mm stroke, S magnet, R axial inlet, and your preferred mounting bracket.
The 4mm rod is built for coaxial thrust, so over this 20mm stroke or under off-axis loads, add an external guide or linear bearing to prevent side loading. The fixed TPU bumper only decelerates the last few millimeters; at higher cycling speeds with real tooling mass, meter-out the exhaust or add an external shock absorber.
Quick checklist
- ✓ Net push force at your working pressure
- ✓ Only one air line / solenoid needed
- ✓ Fail-safe retract on air loss
- ✓ Magnet (S) for sensors?
- ✓ Stroke ≤ 60 mm (single-acting limit)
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 0.7 MPa operating pressure.
- check Allow for spring force in the stroke direction.
- check Do not add an external return mechanism.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PSB Single Acting Compact Cylinder PSB10X20SR FAQ
The net push force is 29.8 N at 0.5 MPa and 45.5 N at the 0.7 MPa maximum. The internal spring sets a 0.2 MPa minimum pressure before the rod moves, and the rod fails safe to the retracted position on air loss.
Yes, the S suffix indicates a built-in piston magnet. It is compatible with AirTAC reed or electronic solid-state switches. The stroke ends use a fixed TPU bumper for deceleration rather than an adjustable shock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PSB Pen-Size Cylinders
Request a Quote for Airtac PSB Single Acting Compact Cylinder PSB10X20SR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.