Airtac SAID100 Double Rod Cylinder SAID100BX110S
The AirTAC Airtac SAID100 Double Rod Cylinder SAID100BX110S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 110mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke110 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID100 Double Rod Cylinder SAID100BX110S
The AirTAC SAID100X110-S is a double-acting, double-rod ISO 15552 profile cylinder. A single piston drives a SUS304 stainless steel rod out of both end covers, yielding an equal extend and retract force of 3681 N at 0.5 MPa. This symmetric output is ideal for twin-station actuation and anti-rotation slides.
Because the rear rod protrudes from the back cover, you can mount a position flag or secondary cam alongside the primary workpiece. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet interfaces directly with AirTAC CMSE reed and DMSE electronic switches for dual-end tracking.
Airtac SAID100 Double Rod Cylinder SAID100BX110S Technical Specifications
| Model | Airtac SAID100 Double Rod Cylinder SAID100BX110S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID100 Double Rod Cylinder SAID100BX110S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID100 Double Rod Cylinder SAID100BX110S Is Used
Symmetric Force Transfer
Drives a workpiece across two parallel stations with identical push and pull thrust, preventing asymmetric loading during high-speed transfers.
Anti-Rotation Slides
The twin-rod design resists torsional twist on long-stroke slides, keeping the carriage perfectly aligned without external guide rails.
Dual-End Sensing
Uses the rear rod end to mount a secondary cam or position flag, triggering DMSE solid-state sensors for redundant machine feedback.
Is the Airtac SAID100 Double Rod Cylinder SAID100BX110S the Right Cylinder?
Choose this 100 mm bore when a 80 mm bore (2268 N at 0.5 MPa) is insufficient, or step down to an 80 mm if your load is lighter. The twin-rod architecture is selected over a single-rod SAI when the mechanism demands dual-side guidance, symmetric transfer, or rear-rod sensing. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (FB, CA, CB, and CR are omitted).
This cylinder is dimensionally interchangeable per ISO 15552. It uses a PT G1/2 port and adjustable air cushions at both ends. Note that the air cushion only decelerates the piston near stroke end; it does not hold the load. If position holding without live pressure is required, use a SAIL lock, BSAID clamp-lock, or external rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID100 Double Rod Cylinder SAID100BX110S FAQ
Because the rod occupies both sides of the piston, the effective area is identical in both directions. The cylinder outputs 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa for both extend and retract strokes.
Yes. The SAID100X110-S is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses a PT G1/2 port and shares the standard SAI mounting interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID100 Double Rod Cylinder SAID100BX110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.