Airtac SAID100 Double Rod Cylinder SAID100X190
The AirTAC Airtac SAID100 Double Rod Cylinder SAID100X190 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 190mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke190 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID100 Double Rod Cylinder SAID100X190
The AirTAC SAID100X190 is a double-acting, double-rod profile cylinder conforming to ISO 15552 mounting dimensions. A single piston drives a carbon steel rod out of both end covers, yielding equal extend and retract forces of 3681 N at 0.5 MPa. Because the annulus area is identical on both sides, push and pull speeds match perfectly.
Exiting the rear end cover provides a secondary mounting point for a position flag, cam, or second tooling station. The extruded aluminum barrel features sensor grooves on both sides for CMSE reed and DMSE electronic switches. This through-rod architecture significantly improves load guidance and resists torsion compared to a single-rod SAI.
Airtac SAID100 Double Rod Cylinder SAID100X190 Technical Specifications
| Model | Airtac SAID100 Double Rod Cylinder SAID100X190 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID100 Double Rod Cylinder SAID100X190
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID100 Double Rod Cylinder SAID100X190 Is Used
Symmetric Transfer
Drives a workpiece one way while simultaneously moving a secondary mechanism or flag on the rear rod, ensuring perfectly synchronized dual-station operation.
Anti-Rotation Slides
The twin-rod architecture prevents piston drift and torsional twist, providing stable linear guidance for precision sliding fixtures.
Through-Rod Sensing
Mounts a DMSE electronic or CMSE reed sensor target on the rear rod end, keeping the primary work area completely unobstructed.
Is the Airtac SAID100 Double Rod Cylinder SAID100X190 the Right Cylinder?
Choose the 100mm bore when your application requires around 3681 N of force in both directions at 0.5 MPa, or up to 6626 N at 0.9 MPa. If your load is lighter, stepping down to an 80mm bore yields 2268 N both ways, while a 125mm bore provides 5734 N for heavier demands. The 190mm stroke is standard, but the twin-rod design increases the overall length, so verify you have sufficient rear-rod clearance.
Select this double-rod variant over a single-rod SAI when you need dual-side actuation, anti-rotation guidance, or rear-end sensing. It uses a reduced mounting accessory set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If position holding without live pressure is required, consider a SAIL or BSAID cylinder. Ports are PT tapered threads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID100 Double Rod Cylinder SAID100X190 FAQ
Because the rod occupies both sides of the piston, the effective area is identical in both directions. It delivers 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa for both extension and retraction.
Yes, the SAID100X190 is an extruded aluminum profile cylinder dimensionally interchangeable per ISO 15552. It serves as a drop-in replacement for other ISO 15552 double-rod cylinders, using the same mounting interface and PT G1/2 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID100 Double Rod Cylinder SAID100X190
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.