Airtac SAID100 Double Rod Cylinder SAID100X210
The AirTAC Airtac SAID100 Double Rod Cylinder SAID100X210 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 210mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke210 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID100 Double Rod Cylinder SAID100X210
The AirTAC SAID100X210 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm bore and 210mm stroke. Because the twin rods occupy both sides of the piston, the annulus area is identical in each direction, yielding an equal extend and retract force of 3681 N at 0.5 MPa. A rod exits both end covers, allowing you to mount the primary workpiece on one end and a secondary cam, position flag, or sensor target on the rear.
This model uses a standard carbon steel rod with PT G1/2 tapered port threads and adjustable air cushions at both ends providing 36mm of cushioning travel. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Without the -S magnet option, this variant is configured for mechanical detection rather than internal reed or electronic switches.
Airtac SAID100 Double Rod Cylinder SAID100X210 Technical Specifications
| Model | Airtac SAID100 Double Rod Cylinder SAID100X210 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID100 Double Rod Cylinder SAID100X210
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID100 Double Rod Cylinder SAID100X210 Is Used
Symmetric Transfer
Drives a transfer carriage with equal push and pull velocity, using the rear rod to operate a secondary mechanism simultaneously.
Anti-Rotation Slides
Keeps guided vertical slides perfectly aligned without twisting, leveraging the dual-rod construction to prevent torsional deflection.
Twin-Station Actuation
Actuates two separate workstations from one piston stroke, mounting a distinct tool or clamp on each protruding rod end.
Is the Airtac SAID100 Double Rod Cylinder SAID100X210 the Right Cylinder?
Choose this 100mm bore when an application requires symmetric thrust and dual-side guidance, stepping up from the 80mm bore which provides 2268 N at 0.5 MPa. The twin-rod architecture inherently resists torsional rotation better than a single-rod SAI cylinder, making it ideal for guided lifts and transfer mechanisms. Since the stroke is 210mm, the unsupported rod length is moderate, but external guidance is recommended if heavy lateral loads are present.
This cylinder is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 double-rod cylinders. It uses the reduced SAID mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR variants found on single-rod models. Note that a plain SAID does not hold its load when air is exhausted; use a SAIL or BSAID clamp-lock cylinder if fail-safe position holding is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID100 Double Rod Cylinder SAID100X210 FAQ
It provides equal force in both extend and retract directions due to the double-rod design. The output is 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa.
Yes, the SAID100X210 is dimensionally interchangeable per ISO 15552 and can serve as a drop-in replacement for other ISO 15552 double-rod cylinders, utilizing its PT G1/2 ports and standard mounting accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID100 Double Rod Cylinder SAID100X210
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.