Airtac SAID100 Double Rod Cylinder SAID100X700S
The AirTAC Airtac SAID100 Double Rod Cylinder SAID100X700S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 700mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke700 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID100 Double Rod Cylinder SAID100X700S
The AirTAC SAID100X700-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm bore and 700mm stroke. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, yielding equal force and speed in both directions. This configuration generates 3681N of thrust and pull at 0.5 MPa, scaling to 5153N at 0.7 MPa.
Equipped with a magnet (-S), it supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side extruded barrel grooves. The standard carbon steel rod provides robust load transmission, while the PT tapered port threads ensure a secure, leak-free pneumatic connection at the G1/2 ports.
Airtac SAID100 Double Rod Cylinder SAID100X700S Technical Specifications
| Model | Airtac SAID100 Double Rod Cylinder SAID100X700S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID100 Double Rod Cylinder SAID100X700S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID100 Double Rod Cylinder SAID100X700S Is Used
Twin-Station Actuation
Drives two separate workstations simultaneously from a single cylinder, utilizing the equal bidirectional force to ensure perfectly synchronized movement on both ends.
Through-Rod Sensing
Mounts a physical cam or limit flag on the rear rod end to trigger external mechanical switches, providing precise end-of-stroke confirmation without cluttering the primary work area.
Anti-Rotation Slides
The dual-rod geometry inherently resists torsional rotation better than a single rod, guiding loads smoothly over the 700mm travel when external rails are impractical.
Is the Airtac SAID100 Double Rod Cylinder SAID100X700S the Right Cylinder?
Select this 100mm bore when an application requires symmetric force that a single-rod SAI cannot provide, such as driving twin mechanisms or mounting a rear cam for position feedback. If your load requirements are lower, stepping down to the 80mm bore yields 2268N both ways at 0.5 MPa. Conversely, heavier payloads might necessitate the 125mm variant. For this 700mm stroke, the extended unsupported rod length increases susceptibility to side-load bending; utilize an external guide rail to prevent premature rod-bearing wear.
As a true ISO 15552 profile cylinder, it offers drop-in dimensional interchangeability with other ISO 15552 double-rod cylinders. It utilizes a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets found on single-rod variants. Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold the load. If position holding without live air pressure is required, consider a BSAID clamp-lock cylinder or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID100 Double Rod Cylinder SAID100X700S FAQ
Because it is a double-rod cylinder, the push and pull forces are identical. It generates 3681N in both directions at 0.5 MPa, 5153N at 0.7 MPa, and 6626N at 0.9 MPa.
Yes, it is dimensionally interchangeable per ISO 15552 standards, meaning it shares the same mounting interface and footprint as comparable double-rod profile cylinders from other manufacturers.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID100 Double Rod Cylinder SAID100X700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.