Airtac SAID50 Double Rod Cylinder SAID50BX50
The AirTAC Airtac SAID50 Double Rod Cylinder SAID50BX50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 50mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ50 mm
- Stroke50 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID50 Double Rod Cylinder SAID50BX50
The AirTAC SAID50X50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm bore and 50mm stroke. Because a SUS304 stainless steel rod exits both end covers, the annulus area is identical on both sides, yielding an equal extend and retract force of 825N at 0.5 MPa. You can mount the workpiece on one end and a cam or position flag on the rear rod for dual-side guidance.
This through-rod design provides superior anti-rotation control compared to a single-rod SAI. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. It uses adjustable air cushions at both ends to decelerate the piston, but note that it will not hold a load if air pressure is lost.
Airtac SAID50 Double Rod Cylinder SAID50BX50 Technical Specifications
| Model | Airtac SAID50 Double Rod Cylinder SAID50BX50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID50 Double Rod Cylinder SAID50BX50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID50 Double Rod Cylinder SAID50BX50 Is Used
Symmetric Force Transfer
Ideal for mechanisms requiring identical push and pull dynamics, leveraging the equal annulus area on both sides for consistent 825N force.
Anti-Rotation Slides
The dual SUS304 rods guide the load against twisting, providing stable linear movement without external guides for short strokes.
Through-Rod Sensing
Mount the primary tool on the front rod and a position flag on the rear to trigger DMSE electronic sensors for dual-station control.
Is the Airtac SAID50 Double Rod Cylinder SAID50BX50 the Right Cylinder?
Choose this 50mm bore when an application requires symmetric force and speed in both directions, offering 825N each way at 0.5 MPa. If your project demands less force, stepping down to the 40mm bore yields 528N, while stepping up to the 63mm bore provides 1402N. The twin-rod structure is selected over a single-rod cylinder when precise anti-rotation or rear-rod actuation is needed. It is dimensionally interchangeable per ISO 15552, using a PT G1/4 port and mounting accessories from the SAID set: Basic, FA, LB, TC, FTC, TCM1, TCM2 (omitting FB, CA, CB, CR).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID50 Double Rod Cylinder SAID50BX50 FAQ
Because the double-rod design subtracts the rod area from both sides, the push and pull forces are equal. It delivers 825N at 0.5 MPa, 1154N at 0.7 MPa, and 1484N at 0.9 MPa in both directions.
Yes. The SAID50X50 is dimensionally interchangeable with other ISO 15552 profile cylinders. It shares the standard mounting interface and G1/4 port, making it a drop-in replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID50 Double Rod Cylinder SAID50BX50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.