Airtac SAID50 Double Rod Cylinder SAID50X10S
The AirTAC Airtac SAID50 Double Rod Cylinder SAID50X10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 10mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ50 mm
- Stroke10 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID50 Double Rod Cylinder SAID50X10S
The AirTAC SAID50X10-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm bore and a 10mm stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical in both directions, yielding an equal push and pull force of 825N at 0.5 MPa. The integrated magnet (-S) enables position tracking using CMSE reed or DMSE solid-state switches housed in the dual sensor grooves.
This through-rod architecture is purpose-built for applications requiring rear-end cam actuation, dual-side guidance, or anti-rotation stability. It shares the standard SAI extruded aluminum barrel but omits the FB, CA, CB, and CR mounts, utilizing a reduced accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2) to fit ISO 15552 mounting dimensions.
Airtac SAID50 Double Rod Cylinder SAID50X10S Technical Specifications
| Model | Airtac SAID50 Double Rod Cylinder SAID50X10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID50 Double Rod Cylinder SAID50X10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID50 Double Rod Cylinder SAID50X10S Is Used
Symmetric Transfer
Equal 825N force in both directions makes it ideal for pushing and pulling a workpiece across a station with identical kinetic profiles.
Rear Cam Actuation
The extending rear rod can drive a secondary mechanical cam or trip a limit switch independently of the primary front-end tooling.
Anti-Rotation Slides
Dual-rod guidance prevents piston rotation during the 10mm stroke, ensuring precise alignment for clamping or pressing tasks.
Is the Airtac SAID50 Double Rod Cylinder SAID50X10S the Right Cylinder?
Select this specific 10mm stroke variant when a compact, short-stroke motion with symmetric output is required. If your application needs less force, stepping down to the 40mm bore yields 528N both ways at 0.5 MPa; if more thrust is needed, the 63mm bore provides 1402N. Choose the SAID twin-rod design over a single-rod SAI when you need to drive a secondary mechanism from the rear or prevent load rotation.
The adjustable air cushions at both ends decelerate the piston near stroke end but do not lock the load. If the mechanism must hold position without live air pressure, consider a SAIL lock cylinder, a BSAID clamp-lock, or an external pilot-operated check valve. Ensure your setup accommodates the rear rod protrusion and uses PT tapered port threading (G1/4).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID50 Double Rod Cylinder SAID50X10S FAQ
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 825N at 0.5 MPa, 1154N at 0.7 MPa, and 1484N at 0.9 MPa.
Yes, the SAID50X10-S is dimensionally interchangeable per ISO 15552 profile standards. It uses a PT G1/4 port and supports standard mounts (Basic, FA, LB, TC, FTC, TCM1, TCM2) for drop-in replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID50 Double Rod Cylinder SAID50X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.