Airtac SAID50 Double Rod Cylinder SAID50X450
The AirTAC Airtac SAID50 Double Rod Cylinder SAID50X450 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 450mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ50 mm
- Stroke450 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID50 Double Rod Cylinder SAID50X450
The AirTAC SAID50X450 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm bore and 450mm stroke. Because a carbon steel rod exits both end covers, the annulus area is identical on extend and retract, yielding 825N of force each way at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches.
This through-rod design allows you to mount the primary workpiece on one end and a position flag or cam on the rear protruding rod. PT tapered port threads (G1/4) seal securely, while adjustable air cushions at both ends absorb kinetic energy near stroke end to protect components.
Airtac SAID50 Double Rod Cylinder SAID50X450 Technical Specifications
| Model | Airtac SAID50 Double Rod Cylinder SAID50X450 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID50 Double Rod Cylinder SAID50X450
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID50 Double Rod Cylinder SAID50X450 Is Used
Symmetric Force Transfer
Drives a shuttle mechanism where the 825N push and pull forces must be perfectly matched to maintain consistent tension on a web or belt during reversal.
Anti-Rotation Slides
Keeps a vertical lifting slide guided and prevented from twisting under load, using the dual-rod structure instead of a single-rod SAI.
Through-Rod Sensing
Actuates a primary clamp on the front rod while the rear rod end drives an independent cam flag to trigger a DMSE solid-state sensor.
Is the Airtac SAID50 Double Rod Cylinder SAID50X450 the Right Cylinder?
Select this 50mm bore when an application requires 825N of symmetric force and superior anti-rotation guidance that a single-rod SAI cannot provide. If your push or pull load is lighter, stepping down to a 40mm bore yields 528N; if heavier, stepping up to a 63mm bore provides 1402N. Remember that a plain SAID does not hold position unpowered—add a SAIL lock or external rod lock if gravity drift is a risk.
For a 450mm stroke, the unsupported rod length increases side-load bending moments on the front bearing. Use an external guide rail to prevent premature wear. This cylinder is dimensionally interchangeable per ISO 15552 and uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID50 Double Rod Cylinder SAID50X450 FAQ
The double-rod design provides equal force in both directions. It delivers 825N at 0.5 MPa, 1154N at 0.7 MPa, and 1484N at 0.9 MPa, for both extend and retract strokes.
Yes, it is dimensionally interchangeable per ISO 15552. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits the FB, CA, CB, and CR accessories used on single-rod variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID50 Double Rod Cylinder SAID50X450
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.