Airtac SAID80 Double Rod Cylinder SAID80X5S
The AirTAC Airtac SAID80 Double Rod Cylinder SAID80X5S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 5mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke5 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID80 Double Rod Cylinder SAID80X5S
The AirTAC SAID80X5-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 5 mm stroke and an 80 mm bore. A single piston drives a carbon steel rod out of both end covers, yielding equal force and speed in both directions. You get about 2268 N of thrust each way at 0.5 MPa, rising to 4082 N at 0.9 MPa.
Because this variant includes the -S magnet, it works directly with AirTAC CMSE reed and DMSE electronic sensors in the dual side grooves. The rear rod extension is ideal for mounting a position flag or driving a secondary mechanism, while the G3/8 PT tapered ports deliver ample flow for rapid cycling.
Airtac SAID80 Double Rod Cylinder SAID80X5S Technical Specifications
| Model | Airtac SAID80 Double Rod Cylinder SAID80X5S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID80 Double Rod Cylinder SAID80X5S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID80 Double Rod Cylinder SAID80X5S Is Used
Symmetric Force Transfer
Pushes and pulls heavy jigs with identical 2268 N force at 0.5 MPa, ensuring balanced motion control across short 5 mm indexing steps.
Dual-Side Actuation
Drives a primary workpiece on the front rod while the rear rod simultaneously operates a secondary cam or mechanical interlock.
Anti-Rotation Slides
Twin carbon steel rods exiting both ends prevent piston rotation, maintaining precise angular alignment for delicate short-stroke pressing tasks.
Is the Airtac SAID80 Double Rod Cylinder SAID80X5S the Right Cylinder?
Select this 80 mm bore when an application demands symmetric force within a very short 5 mm travel window. If you need less force, stepping down to the 63 mm bore provides 1402 N at 0.5 MPa, whereas moving up to the 100 mm bore yields 3681 N. The twin-rod design is chosen over a single-rod SAI when the mechanism requires dual-side guidance, anti-rotation stability, or rear-end position sensing.
As a true ISO 15552 profile cylinder, it serves as a drop-in replacement for other ISO 15552 double-rod cylinders. It supports the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. Note that a plain SAID will drift if air pressure is lost; use a SAIL or BSAID lock variant if the load must be held safely without live pressure.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID80 Double Rod Cylinder SAID80X5S FAQ
Because the rod area is subtracted on both sides, the SAID80X5-S generates equal force in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa.
Yes. The SAID80X5-S is a dimensionally interchangeable ISO 15552 profile cylinder. It shares the standard mounting interface and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets, though it omits FB, CA, CB, and CR mounts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID80 Double Rod Cylinder SAID80X5S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.