Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 110mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke110 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10S
The AirTAC SAIJ200X110-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 100 to 110 mm, allowing you to dial back the stroke by up to 10 mm during commissioning without adding external stops. As a 200 mm bore unit, it delivers immense thrust, generating 15708 N of push force and 15080 N of pull force at 0.5 MPa.
This SKU is built with a SUS420J2 stainless steel rod for superior corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and because this is an -S model, it includes a magnet for use with AirTAC CMSE reed and DMSE electronic solid-state sensors. The rear adjuster acts purely as a travel stop to set the end position; it is not a lock and will not hold the load without live air pressure.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10S Is Used
Heavy Press Fine-Tuning
Ideal for heavy pressing tasks where the 10 mm adjustment window allows operators to precisely set the bottoming position without swapping out the entire 200 mm bore cylinder.
Product Size Changeover
Enables rapid line adjustments for varying product sizes, using the rear stopper to quickly shorten the effective stroke from 110 mm down to 100 mm during format resets.
Position Calibration
Perfect for final end-position calibration on large machinery, ensuring the massive 15708 N push force hits its exact target at commissioning without external stopper hardware.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10S the Right Cylinder?
Choose this 200 mm bore cylinder when your application requires up to 3204 kgf of maximum output force at 1.0 MPa. If you need less force, stepping down to a 160 mm bore yields 10053 N of push force at 0.5 MPa, whereas moving up is not possible as this is the largest standard SAIJ size. The adjustable stroke is ideal for machine setups requiring variable end stops or product changeovers, providing fine-tuning flexibility that a fixed-stroke SAI cylinder cannot offer.
Because the nominal stroke is 110 mm, an external guide is not explicitly mandated for side loads, but the 40 mm rod diameter and M36x2 rod thread provide a robust interface for heavy mounting. If your machinery needs to hold a load securely without continuous air pressure, this cylinder will not suffice; you should select a SAIL (air-released lock) or BSAI (clamp-lock) cylinder instead. This model uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10S FAQ
At a 0.5 MPa operating pressure, this 200 mm bore cylinder generates 15708 N of push force and 15080 N of pull force. At its maximum rated pressure of 1.0 MPa, it delivers a maximum push force of 3204 kgf.
The rear adjuster screw allows you to shorten the effective travel from the nominal 110 mm down to 100 mm. This creates a 100-110 mm adjustable window for fine-tuning the end position at commissioning. The adjuster acts only as a travel stop and does not lock or hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200AX110-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.