Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-100S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-100S
The AirTAC SAIJ200X130-100-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers massive thrust, pushing with 15708N and pulling with 15080N at 0.5 MPa. By turning the rear stopper screw, you can trim the nominal 130 mm travel back by up to 100 mm, creating a highly flexible 30-130 mm usable stroke window for precise end-position tuning during commissioning.
This specific configuration features a SUS420J2 stainless steel rod (code A) for superior corrosion resistance and includes a built-in magnet (-S) for position sensing. It pairs seamlessly with AirTAC CMSE reed switches and DMSE solid-state electronic sensors, which drop directly into the extruded aluminum barrel's dual-side sensor grooves. The G3/4 PT tapered ports ensure high airflow to maintain smooth 30-500 mm/s cycling speeds.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-100S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-100S Is Used
Heavy Press Tunning
Dial in the exact 30-130 mm clamping depth on heavy assembly presses without changing hardware.
Product Changeover
Rapidly adapt automated lines for different part sizes by adjusting the rear stopper on the fly.
Variable End Stops
Set precise retract positions for multi-stage forming operations using the 100 mm trim window.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-100S the Right Cylinder?
Choose this SAIJ200X130-100-S when an application requires extreme force combined with a highly variable end-stop. If you need slightly less thrust to save space and weight, stepping down to a 160 mm bore yields 10053N of push force at 0.5 MPa. The 100 mm adjustment range is ideal for machinery that frequently handles product-size changeovers, allowing you to reposition the retract end without swapping the cylinder or adding external stops.
Because the 130 mm stroke is well below the 300 mm threshold, side-load risks are moderate, but the robust 40 mm rod and M36x2 thread handle significant offset loads. Remember that the rear adjuster acts purely as a travel stop and the air cushions only manage deceleration; neither will hold a load without live air pressure. For true fail-safe load holding, consider the SAIL (air-released lock) or BSAI (clamp-lock) series. This model is dimensionally interchangeable per ISO 15552.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-100S FAQ
At 0.5 MPa operating pressure, this 200 mm bore cylinder provides 15708N of push force and 15080N of pull force. It can reach a maximum of 3204 kgf at 1.0 MPa.
The rear adjusting screw acts as an external stopper that lets you shorten the 130 mm nominal stroke by up to 100 mm, providing a usable travel window of 30 to 130 mm for fine-tuning the end position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.