Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-10S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-10S
The AirTAC SAIJ200X130-10-S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty tasks. It features a rear adjusting screw that allows you to fine-tune the end-of-stroke position, providing a usable travel window of 120 to 130 mm. Delivering a substantial push force of 15708 N at 0.5 MPa, it is built to handle massive loads with precision.
This unit includes a SUS420J2 stainless steel piston rod for superior corrosion resistance and features a magnetic piston for position sensing. The extruded aluminum barrel incorporates sensor grooves on both sides, seamlessly accepting CMSE reed or DMSE electronic switches. It utilizes PT tapered ports and offers variable air cushions at both ends to decelerate heavy moving masses effectively.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-10S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-10S Is Used
Heavy Press Fit Tuning
Dial in the exact 120-130 mm travel window during heavy assembly commissioning to perfect press fits without physically swapping out large actuators.
Product Size Changeover
Quickly adjust the rear stopper by up to 10 mm to accommodate slightly different product lengths on a high-force production line.
Massive Load Positioning
Leverage the 15708 N push force at 0.5 MPa to shift heavy jigs into place, using the fine adjustment to guarantee precise end positioning.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-10S the Right Cylinder?
Selecting this 200 mm bore model makes sense when your application demands extreme thrust, such as 15708 N of push force at just 0.5 MPa, stepping up from the 160 mm bore which yields 10053 N. The 10 mm rear adjuster is ideal for dialing in exact end-stops during machine commissioning or product changeover without swapping out the entire cylinder. For operations requiring a fixed, non-adjustable travel, the standard SAI cylinder is a simpler alternative.
Because this is a 130 mm stroke, side-load risks are minimal, but the massive 40 mm rod and M36x2 thread handle substantial lateral stress. Remember that the rear adjuster and air cushions only decelerate the load; they do not hold it without live air pressure. For secure load-holding in the event of pressure loss, consider the SAIL or BSAI series. To match this ISO 15552 footprint exactly, specify a 200 mm bore, 130 mm stroke, 10 mm adjustment, PT ports, and the -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-10S FAQ
At 0.5 MPa, it provides a push force of 15708 N and a pull force of 15080 N. If pressure is increased to 0.7 MPa, the push force rises to 21991 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the nominal 130 mm stroke by up to 10 mm. This creates a 120-130 mm usable travel window for fine-tuning end positions without altering the cylinder mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200AX130-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.