Airtac SAIJ200 Adjustable Cylinder SAIJ200AX220-10S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200AX220-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 220mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke220 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX220-10S
The AirTAC SAIJ200X220-10-S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty tasks, delivering a substantial 15708N push force at 0.5 MPa. Fitted with an SUS420J2 stainless steel rod and a built-in magnet, it integrates seamlessly with AirTAC CMSE reed and DMSE electronic sensors via its dual-side barrel grooves.
This adjustable-stroke variant features a rear stopper that trims the nominal 220mm stroke by up to 10mm, creating a precise 210-220mm usable travel window. This allows operators to fine-tune the retract end-position during commissioning without external stops. The G3/4 port and M36x2 rod thread ensure robust fluid flow and high side-load resilience.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX220-10S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200AX220-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200AX220-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX220-10S Is Used
Heavy Press Tuning
Dial in the exact 210-220mm retract position on heavy stamping presses during initial setup, absorbing high kinetic energy safely.
Large Product Changeover
Adjust the end-stop by up to 10mm on packaging lines to accommodate varying large product dimensions without changing the cylinder.
Automated Assembly Stops
Fine-tune the retraction point on heavy automotive assembly lines, using the built-in magnet for DMSE solid-state sensor feedback.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200AX220-10S the Right Cylinder?
Choose this 200mm bore cylinder when an application demands extreme thrust up to 15708N at 0.5 MPa, stepping up from a 160mm bore that provides 10053N. The 10mm adjustment window is perfect for dialing in exact end-positions on product changeovers, offering flexibility a fixed SAI cylinder cannot match. For strokes of 220mm or more, always use an external guide to support the load and prevent rod bending.
The rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure. If your setup requires true load-holding, consider the SAIL pneumatic lock or BSAI clamp-lock cylinders. This model uses PT tapered ports and supports mountings from the reduced SAIJ set: Basic, FA, LB, TC, FTC, TCM1, TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200AX220-10S FAQ
At 0.5 MPa operating pressure, this 200mm bore cylinder provides a push force of 15708N and a pull force of 15080N. It can reach a maximum push force of 3204 kgf at 1.0 MPa.
The rear adjusting screw allows you to shorten the 220mm nominal stroke by up to 10mm, providing a usable travel window of 210-220mm. This stopper only sets the end position and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200AX220-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.