Airtac SAIJ200 Adjustable Cylinder SAIJ200BX130-30S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200BX130-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX130-30S
The AirTAC SAIJ200X130-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 15708N push force at 0.5MPa and features a 100-130mm usable travel window, allowing you to dial back the 130mm nominal stroke by up to 30mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides, and the -S magnet works directly with AirTAC CMSE reed and DMSE electronic solid-state switches.
This specific configuration uses a SUS304 stainless steel rod (code B) for superior corrosion resistance and carries a robust M36x2 rod thread. Fluid supply is via PT tapered G3/4 ports. The rear adjustment screw acts solely as a travel stop to fine-tune the retract end position; it does not lock or hold the load without live air pressure.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX130-30S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200BX130-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200BX130-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX130-30S Is Used
Heavy Press Tuning
Dial in the exact 100-130mm end position for high-force pressing tasks without swapping cylinders.
Product Changeover
Quickly adjust the retract stop to accommodate varying package sizes on a high-thrust line.
Machine Setup
Fine-tune the travel window during commissioning to prevent mechanical crashes on heavy tooling.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX130-30S the Right Cylinder?
Choose this 200mm bore cylinder when your application requires massive thrust up to 15708N at 0.5MPa, stepping up significantly from the 160mm bore which offers 10053N. The adjustable 100-130mm stroke window is ideal for product-size changeovers on a line, letting you fine-tune the end position without swapping the cylinder or bolting on external stops. For load-holding without live pressure, the adjuster is not a lock; you would need the SAIL or BSAI series instead.
As an ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Even though the stroke is 130mm, the heavy 200mm bore and M36x2 rod thread handle high side loads well, though long unsupported strokes still need an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX130-30S FAQ
At 0.5MPa operating pressure, this 200mm bore cylinder provides a push force of 15708N and a pull force of 15080N. It can deliver up to 3204 kgf at its maximum 1.0MPa pressure.
The rear adjuster screw lets you trim the 130mm nominal stroke back by up to 30mm, creating a 100-130mm usable travel window. It acts as a travel stop for end-position tuning, not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200BX130-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.