Airtac SAIJ200 Adjustable Cylinder SAIJ200BX145-20S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200BX145-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 145mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke145 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX145-20S
The AirTAC SAIJ200X145-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers massive thrust, pushing 15708 N and pulling 15080 N at 0.5 MPa, while operating at a controlled speed of 30-500 mm/s. The barrel is extruded aluminum, featuring sensor grooves on both sides for straightforward position feedback.
This specific SKU provides a usable travel window of 125 to 145 mm, allowing you to dial back the nominal stroke by up to 20 mm during commissioning. It includes a SUS304 stainless steel rod for superior corrosion resistance and comes with a -S magnet for direct compatibility with CMSE reed and DMSE electronic sensors. The PT tapered ports are G3/4.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX145-20S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200BX145-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200BX145-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX145-20S Is Used
Heavy Press Fine-Tuning
Dial in the exact 125-145 mm end-position on high-force pressing tasks to accommodate material thickness variations without changing the cylinder setup.
Product Changeover
Quickly adjust the stroke stop on a production line when switching between different large-scale product sizes, minimizing downtime.
Heavy-Duty Positioning
Move substantial loads with up to 15708 N of push force, using the rear stopper to precisely set the retraction limit for heavy industrial assembly.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX145-20S the Right Cylinder?
Choose this 200 mm bore when a 160 mm bore (delivering 10053 N push at 0.5 MPa) is insufficient for your heaviest loads. The adjustable stroke is ideal for product changeovers or fine-tuning the end position without swapping the entire cylinder or bolting on external stops. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for true load-holding without pressure, select a SAIL or BSAI cylinder. To replace an ISO 15552 cylinder, match the 200x145 stroke, 20 mm adjustment, G3/4 PT ports, SUS304 rod, and -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX145-20S FAQ
At 0.5 MPa, it provides a push force of 15708 N and a pull force of 15080 N. It can reach a maximum push force of 21991 N at 0.7 MPa.
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm, creating a usable travel window of 125 to 145 mm for fine-tuning without external stops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200BX145-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.