Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-100
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 160mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke160 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-100
The AirTAC SAIJ200X160-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 60-160 mm usable travel window. Delivering 15708 N of push force at 0.5 MPa, this 200 mm bore unit is built for heavy-duty positioning. It omits the FB, CA, CB, and CR mounts, supporting only the Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces.
This specific SKU utilizes a SUS304 stainless steel rod (option B) for superior corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed and DMSE electronic sensors if a magnet is added later. Operating speed spans 30-500 mm/s.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-100 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-100 Is Used
Heavy Press Tonnage
Provides massive 15708 N thrust at 0.5 MPa for forming and pressing heavy components securely.
Variable End-Stop Setup
Dials the travel window back by up to 100 mm to accommodate different product sizes on the same line.
Corrosive Assembly
Leverages the SUS304 stainless steel rod for reliable actuation in wash-down or corrosive manufacturing environments.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-100 the Right Cylinder?
Choose this 200 mm bore when your application requires the maximum standard thrust, stepping up from a 160 mm bore that yields 10053 N at 0.5 MPa. The 100 mm adjustment range is ideal for product changeovers, letting you dial in the exact end-stop without physically swapping the cylinder. Because the rear screw is a travel stop and not a locking mechanism, it cannot hold loads without live air; for true fail-safe holding, consider an external pilot-operated check valve or the SAIL series. To match this ISO 15552 replacement exactly, specify: 200 mm bore, 160 mm nominal stroke, 100 mm adjust, PT port thread, SUS304 rod, no magnet, and the reduced mounting set.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-100 FAQ
At 0.5 MPa operating pressure, this 200 mm bore cylinder generates 15708 N of push force and 15080 N of pull force. It can deliver up to 3204 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 100 mm. For this 160 mm nominal stroke model, it creates a usable travel window of 60 to 160 mm without changing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.