Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-30
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 160mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke160 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-30
The AirTAC SAIJ200X160-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position. With a 160 mm nominal stroke and a 30 mm adjustment range, it provides a usable travel window of 130 to 160 mm. It delivers massive thrust, pushing 15708 N and pulling 15080 N at 0.5 MPa, making it suited for moving heavy loads.
This specific configuration incorporates a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides. Note that the rear adjuster acts purely as a travel stop to decelerate the piston and cannot hold the load without live air pressure.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-30 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-30 Is Used
Heavy Press Tuning
Dial in the exact 130-160 mm travel window during machine commissioning to accommodate varying material thicknesses without changing the cylinder.
Product Changeover Stops
Adjust the end-stop position on the fly when switching box sizes or pallet dimensions on a high-throughput packaging line.
Corrosive Heavy Lifts
Leverage the 15708 N push force and SUS304 stainless steel rod to shift heavy payloads in washdown or chemically exposed environments.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-30 the Right Cylinder?
Choose this 200 mm bore when your application requires up to 15708 N of push force at 0.5 MPa, or step down to a 160 mm bore if you only need 10053 N. The adjustable stroke is ideal for product changeovers on a line, allowing you to dial in the exact end-stop without swapping cylinders or adding external stops. For load-holding without continuous air pressure, this cylinder is insufficient; consider the SAIL or BSAI series instead.
When replacing an ISO 15552 cylinder, match the 200 mm bore, 160 mm stroke, 30 mm adjustment, PT G3/4 ports, and SUS304 rod material. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. Although the 40 mm rod and M36x2 thread handle high side loads, an external guide is recommended for this 160 mm stroke to prevent premature wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-30 FAQ
At 0.5 MPa operating pressure, this 200 mm bore cylinder provides 15708 N of push force and 15080 N of pull force. It can reach a maximum of 3204 kgf at 1.0 MPa.
The rear adjuster screw lets you shorten the effective stroke by up to 30 mm, creating a usable travel window of 130 to 160 mm. It acts as a stop to set the end position and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200BX160-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.