Airtac SAIJ200 Adjustable Cylinder SAIJ200BX600-100S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200BX600-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke600 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX600-100S
The AirTAC SAIJ200X600-100-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, delivering massive 21991N push force at 0.7 MPa. Its 600 mm nominal stroke can be dialed back by up to 100 mm, providing a 500-600 mm usable travel window for exact end-position tuning. The SUS304 stainless steel rod and PT tapered ports ensure high corrosion resistance and a robust seal.
This adjustable-stroke design allows you to fine-tune the retract end at commissioning or during product changeover without swapping the cylinder or adding external stops. The extruded aluminum barrel features sensor grooves on both sides for CMSE and DMSE switches, while the speed range is 30-500 mm/s.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX600-100S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200BX600-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200BX600-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX600-100S Is Used
Heavy Press Tuning
Dial in the exact 500-600 mm end-stop during machine setup to precisely control heavy pressing operations without external stops.
Product Changeover
Adjust the retract position on the fly to handle different product sizes on a high-thrust conveyor line.
Long-Stroke Assembly
Fine-tune the end of a 600 mm stroke in heavy assembly jigs, using the 100 mm window to compensate for mechanical tolerances.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX600-100S the Right Cylinder?
Choose this 200 mm bore cylinder when your application requires extreme thrust, such as 21991N push at 0.7 MPa, alongside a long 600 mm travel. If you need less force, stepping down to a 160 mm bore yields 14074N push at 0.7 MPa, which might suffice for lighter loads. Because the 600 mm stroke is long, an external guide is recommended to manage side loads on the 40 mm rod.
The rear adjuster acts as a travel stop, not a lock, meaning it will not hold the load without live air pressure. For load-holding without live pressure, consider the SAIL or BSAI series. This SAIJ model uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable per ISO 15552.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX600-100S FAQ
At 0.7 MPa, this 200 mm bore cylinder provides 21991N of push force and 21991N of pull force. At 0.5 MPa, it delivers 15708N push and 15080N pull.
The rear adjuster lets you shorten the 600 mm nominal stroke by up to 100 mm, creating a 500-600 mm usable travel window. It acts as a mechanical stop to fine-tune end positions and is not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200BX600-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.