Airtac SAIJ200 Adjustable Cylinder SAIJ200BX650-20S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200BX650-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 650mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke650 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX650-20S
The AirTAC SAIJ200X650-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling you to fine-tune the end position by up to 20 mm. This yields a precise 630-650 mm usable travel window at commissioning without needing external stops. It delivers massive thrust, generating 15708 N of push force and 15080 N of pull force at 0.5 MPa.
Built for demanding environments, this variant features a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel maintains standard ISO 15552 mounting dimensions, while the M36x2 rod thread and 40 mm rod diameter provide a robust interface capable of handling high side loads.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX650-20S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200BX650-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200BX650-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX650-20S Is Used
Heavy Press Tuning
Dial in the exact 630-650 mm end position during heavy press commissioning to accommodate material thickness variations without machining new stop blocks.
Product Line Changeover
Quickly adjust the stroke window on automated assembly lines when switching between large product sizes, minimizing machine downtime.
Heavy Load Positioning
Move substantial loads using the 15708 N push force, relying on the 40 mm SUS304 rod to maintain structural integrity in harsh environments.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX650-20S the Right Cylinder?
Select this 200 mm bore cylinder when an application requires extreme force that smaller bores cannot provide, such as the 160 mm bore yielding 10053 N at 0.5 MPa. The adjustable stroke is ideal for product changeovers, allowing operators to dial in the 630-650 mm travel range without swapping hardware. For exact ISO 15552 replacement matching, verify the 650 mm stroke, 20 mm adjustment, PT tapered port threads, and the -S magnet requirement.
Because the 650 mm stroke is substantial, an external guide is recommended to prevent excessive side-loading on the rod. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider an AirTAC SAIL or BSAI cylinder. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX650-20S FAQ
At 0.5 MPa operating pressure, this 200 mm bore cylinder provides 15708 N of push force and 15080 N of pull force. It can reach a maximum push force of 28274 N at 0.9 MPa.
The rear adjuster screw allows you to shorten the nominal 650 mm stroke by up to 20 mm, creating a 630-650 mm usable travel window. This stopper only sets the end position and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200BX650-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.