Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-10
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 700mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke700 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-10
The AirTAC SAIJ200X700-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering massive thrust with a 15708 N push force at 0.5 MPa. Its SUS304 stainless steel rod provides excellent corrosion resistance for harsh environments. With a nominal 700 mm stroke, the integrated stopper allows you to fine-tune the effective travel down to 690 mm, creating a precise 690-700 mm usable window without requiring external stops.
This bore size features a G3/4 port and a robust 40 mm rod with an M36x2 thread, engineered to handle heavy loads safely. The extruded aluminum barrel includes sensor grooves on both sides, and operating speeds of 30-500 mm/s are supported. It utilizes adjustable air cushions at both ends to decelerate the heavy payload smoothly.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-10 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-10 Is Used
Heavy Machinery Setup
Fine-tune the 690-700 mm end position during heavy machinery commissioning to achieve exact alignment without machining new spacer blocks.
Product Changeovers
Adapt a high-thrust conveyor line quickly for different product lengths by dialing the rear stopper back by up to 10 mm.
Large Assembly Presses
Leverage the 15708 N push force to seat large components, relying on the adjustable end-stop to prevent over-travel.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-10 the Right Cylinder?
Select this 200 mm bore cylinder when an 80 mm bore (yielding 2513 N push at 0.5 MPa) is insufficient for moving heavy assemblies. The adjustable 10 mm window is highly beneficial during machine commissioning or product changeovers, allowing you to dial in the exact end position without physically swapping the cylinder for a fixed-stroke SAI variant. Because the stroke is 700 mm, the long unsupported rod is susceptible to side-loading; an external guide mechanism is required to prevent premature seal wear.
For a true ISO 15552 replacement match, verify the 200 mm bore, 700 mm stroke, 10 mm adjustment, PT tapered port threads, and the required mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure; for positive load-holding, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-10 FAQ
At 0.5 MPa operating pressure, this 200 mm bore cylinder provides a push force of 15708 N and a pull force of 15080 N. At the maximum 1.0 MPa pressure, it achieves a push force of 31416 N.
The rear adjusting screw acts as a mechanical stopper, allowing you to shorten the 700 mm nominal stroke by up to 10 mm. This creates a usable travel window of 690-700 mm for fine-tuning the retract position at commissioning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.