Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-100
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 700mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke700 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-100
The AirTAC SAIJ200X700-100 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling a usable travel window of 600 to 700 mm. It delivers massive thrust, generating 15708 N of push force and 15080 N of pull force at 0.5 MPa, making it suitable for heavy-duty industrial positioning. The extruded aluminum barrel design integrates sensor grooves on both sides for straightforward switch mounting.
This variant features a 40 mm SUS304 stainless steel rod and a PT tapered G3/4 port. The rear adjustment screw acts strictly as a mechanical stop to fine-tune the retract end position during commissioning without requiring external stops; it does not hold the load without live air pressure. For applications requiring true load-holding, the SAIL or BSAI series should be specified instead.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-100 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-100 Is Used
Heavy Press Positioning
Dial in the exact 600 to 700 mm retract position for large stamping or press operations, allowing quick product changeover without replacing the entire cylinder.
Variable End-Stop Automation
Set precise physical stops for heavy material handling lines, using the 100 mm adjustment window to adapt machinery to different material lengths on the fly.
Large Assembly Tuning
Fine-tune the end-of-stroke position during machine commissioning to perfect the alignment of large components, leveraging the 40 mm SUS304 rod for high rigidity.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-100 the Right Cylinder?
Choose this 200 mm bore cylinder when your application requires up to 15708 N of thrust at 0.5 MPa, or step down to the 160 mm bore if 10053 N is sufficient. The adjustable stroke is ideal for machine setups requiring variable end-stops or product-size changeovers, eliminating the need to physically swap cylinders for different travel lengths. Mounting options are limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles.
Because the 700 mm stroke is substantial, the 40 mm rod provides robust support, but an external guide is strongly recommended to prevent excessive side-loading and rod deflection. Ensure your setup matches the PT G3/4 port thread and the SUS304 rod material for optimal corrosion resistance and durability in demanding environments.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-100 FAQ
At 0.5 MPa operating pressure, this 200 mm bore cylinder provides 15708 N of push force and 15080 N of pull force. At the maximum 1.0 MPa pressure, it can deliver up to 3204 kgf.
The rear adjuster screw allows you to mechanically shorten the effective stroke from 700 mm down to 600 mm. This stopper fine-tunes the end position during setup but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200BX700-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.