Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-10S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 95mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke95 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-10S
The AirTAC SAIJ200X95-10-S is a double-acting, single-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a substantial 15708N push force at 0.5 MPa, with a nominal 95mm stroke that can be fine-tuned down by up to 10mm, creating an 85-95mm usable travel window. The SUS304 stainless steel rod is specified here for superior corrosion resistance.
Equipped with a magnet for position sensing, this unit supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed in the dual-side extruded barrel grooves. The rear adjuster acts purely as a mechanical stop to dial in end positions during commissioning; it does not lock or hold the load without live air pressure. Pneumatic cushioning at both ends manages deceleration across its 30-500mm/s speed range.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-10S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-10S Is Used
Press Fit Calibration
Dial in the exact 85-95mm press depth for high-force assembly operations without swapping out the entire cylinder.
Product Changeover
Quickly adjust the rear stopper by up to 10mm to accommodate slight variations in part sizes on a production line.
Heavy Forming End-Stop
Leverage 15708N of thrust at 0.5 MPa for robust forming tasks while relying on the built-in stop for precise positioning.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-10S the Right Cylinder?
Choose this 200mm bore when an application demands extremely high thrust, stepping up from a 160mm bore that yields 10053N at 0.5 MPa. The 10mm adjustable window is ideal for fine-tuning a specific end-of-stroke position during machine setup or product changeover without adding external stops. For load-holding without continuous air pressure, this cylinder is insufficient; consider the SAIL pneumatic lock or BSAI clamp-lock series instead.
When replacing an ISO 15552 cylinder, match the 200mm bore, 95mm stroke, 10mm adjustment, PT tapered port thread, and the -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. Even at 95mm stroke, the 40mm rod and M36x2 thread handle high side loads, though any long unsupported travel still requires an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-10S FAQ
At 0.5 MPa operating pressure, this 200mm bore cylinder provides 15708N of push force and 15080N of pull force. At the maximum 1.0 MPa pressure, it delivers 3204 kgf.
The rear adjuster screw allows you to shorten the 95mm nominal stroke by up to 10mm, providing an 85-95mm travel window. This mechanical stop only sets the end position; it does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.