Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-50S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 95mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke95 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-50S
The AirTAC SAIJ200X95-50-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a substantial 15708N push force at 0.5 MPa and features a 50mm adjustment range, allowing you to dial the effective travel down anywhere within a 45-95mm window. This fine-tuning capability is ideal for dialing in exact end positions during commissioning without needing external stops.
Built with a SUS304 stainless steel rod (code B), this 200mm bore unit resists corrosion and handles demanding environments. The integrated magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side extruded aluminum barrel grooves. It uses a PT G3/4 port and includes adjustable air cushions at both ends to manage kinetic energy.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-50S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-50S Is Used
Heavy Press Tuning
Dial in the exact 45-95mm contact distance on heavy pressing operations without swapping cylinders or adding external mechanical stops.
Product Changeover
Quickly adjust the retract end-position by up to 50mm on a packaging line when switching to different product sizes.
High-Force Positioning
Leverage the 15708N push force at 0.5 MPa to move heavy pallets, using the rear screw to set the precise resting distance.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-50S the Right Cylinder?
Select this 200mm bore cylinder when an application requires extreme thrust, such as 15708N push or 15080N pull at 0.5 MPa, combined with precise end-position tuning. If you need to step down the force, a 160mm bore offers 10053N push at 0.5 MPa. The 50mm adjustment screw lets you trim the retract stroke on the fly during product changeovers. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-air load holding, consider an AirTAC SAIL or BSAI cylinder. To match this ISO 15552 interchangeable cylinder, confirm the 95mm stroke, 50mm adjust, PT G3/4 port, and -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-50S FAQ
The rear adjuster screw allows you to shorten the nominal 95mm stroke by up to 50mm, creating a usable travel window of 45-95mm. It acts as a mechanical stop to set the end position and is not a lock.
At 0.5 MPa, it provides 15708N of push force and 15080N of pull force. At 0.7 MPa, the push force increases to 21991N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200BX95-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.