Airtac SAIJ50 Adjustable Cylinder SAIJ50AX600-100S
The AirTAC Airtac SAIJ50 Adjustable Cylinder SAIJ50AX600-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 600mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ50 mm
- Stroke600 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ50 Adjustable Cylinder SAIJ50AX600-100S
The AirTAC SAIJ50X600-100-S is a double-acting, single-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 982N push force at 0.5 MPa and uses a PT G1/4 port. The integrated -S magnet enables position sensing with AirTAC CMSE reed and DMSE electronic switches.
Equipped with a 100mm adjustment range, this model allows you to dial back the 600mm nominal stroke to a precise 500-600mm travel window. It features an SUS420J2 stainless steel rod for corrosion resistance and includes variable air cushions at both ends to manage end-of-stroke impacts.
Airtac SAIJ50 Adjustable Cylinder SAIJ50AX600-100S Technical Specifications
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50AX600-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50AX600-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50AX600-100S Is Used
Machine Changeover
Dial in the 500-600mm stroke window during product size transitions to set new end-stops rapidly without swapping hardware.
Variable Diverting
Adjust the retract position on the fly to accommodate different package lengths moving down a packaging line.
Commissioning Calibration
Fine-tune the final end-position during machine setup to clear mechanical interference without machining external stoppers.
Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50AX600-100S the Right Cylinder?
Choose this 50mm bore cylinder when an application requires exact end-position tuning during commissioning or product changeover without adding external stops. If you need higher force, the 63mm bore offers 1559N at 0.5 MPa; for lighter duties, the 40mm bore provides 628N. Because the 600mm stroke is long, an external guide is recommended to prevent excessive side-loading on the 20mm rod.
The rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure. For fail-safe load holding, consider the SAIL or BSAI cylinder series. This SAIJ model is dimensionally interchangeable per ISO 15552 and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ50 Adjustable Cylinder SAIJ50AX600-100S FAQ
At 0.5 MPa operating pressure, this 50mm bore cylinder generates a push force of 982N and a pull force of 825N.
The rear adjuster allows you to shorten the 600mm nominal stroke by up to 100mm, creating a usable travel window of 500-600mm for precise end-position tuning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50AX600-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.