Airtac SAUD Double Rod Cylinder SAUD32X100
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X100 is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X100
The AirTAC SAUD32X100 is a 32 mm bore, 100 mm stroke double-acting profile cylinder with a rod extending from both ends. This configuration yields equal push and pull force, delivering 345 N each way at 0.5 MPa. The extruded aluminum body is shorter than a standard ISO 15552 unit of the same bore. It uses a 1/8 inch port and M10x1.25 rod threads.
Because both faces share the same rod-side area, output is perfectly balanced. This provides a computed safe working load of roughly 207 N, or a vertical lift capacity of about 18 kg with a 2:1 safety margin. The twin rods prevent rotation during travel and allow driving two separate tools. A Viton H seal option can extend the operating temperature up to 150 C.
Airtac SAUD Double Rod Cylinder SAUD32X100 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X100 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X100
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X100 Is Used
Twin-Spindle Pickup
Drives two small machining spindles simultaneously with equal push and pull force, ensuring balanced part loading and unloading.
Transfer Pusher
Moves lightweight cartons along a belt line without twisting, using the rigid double-rod structure to maintain exact alignment.
Gripper Synchronization
Actuates opposing gripper jaws from a single compact body, relying on the anti-rotation properties of the dual rods.
Is the Airtac SAUD Double Rod Cylinder SAUD32X100 the Right Cylinder?
Choose this 32 mm bore if your application needs precise anti-rotation guidance or synchronized twin-tool actuation within a compact envelope. It generates 345 N both ways at 0.5 MPa. If you need less force, the smaller SAUD40 bore provides 528 N; stepping down further is not an option as 32 mm is the smallest available size. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. This specific SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors. For any stroke over 300 mm, use external guide rails to prevent side-load binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X100 FAQ
Because the piston rod exits both ends, the force is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. The 1/8 inch port supplies air to both chambers.
No. The internal air cushion only decelerates the piston near the stroke end; it does not act as a brake. For load holding, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.