Airtac SAUD Double Rod Cylinder SAUD32X1000
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X1000 is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 1000mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke1000 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X1000
The AirTAC SAUD32X1000 is a double-acting, double-rod profile cylinder. A 12mm rod exits both ends of the hard-anodized aluminum extruded barrel, meaning both faces use the rod-side area. This yields exactly 345 N of force each way at 0.5 MPa. The design is notably shorter than an ISO 15552 unit of the same 32mm bore.
Because the rear rod protrudes, it is perfect for driving twin tools or carrying a switch cam, though this specific SKU lacks a magnet and cannot host CMSG or DMSG sensors. The 1/8" port feeds a 30-800 mm/s speed range. Based on the 345 N output, your safe working load is roughly 207 N, which translates to a vertical lift capacity of about 18 kg with a 2:1 safety margin.
Airtac SAUD Double Rod Cylinder SAUD32X1000 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X1000 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X1000
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X1000 Is Used
Twin-Tool Transfer
Drives two synchronized workheads from opposite rod ends to load and unload parts simultaneously without twist.
Guided Cutting Feed
Provides a rigid, non-rotating push for a 1000mm blade traverse where precise linear tracking is required.
Dual-End Divertor
Actuates sorting flaps on both sides of a belt using the equal bidirectional force to push products cleanly.
Is the Airtac SAUD Double Rod Cylinder SAUD32X1000 the Right Cylinder?
Choose this 32mm bore delivering 345 N both ways when you need strict anti-rotation guidance or synchronized twin-tool actuation over its 1000mm travel. If you need less force, step down to a 20mm bore, or step up to the 40mm bore providing 528 N both ways for heavier duty. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. At 1000mm stroke, external guides are mandatory to prevent rod bending under side loads. Note this non-magnetic version cannot accept sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X1000 FAQ
The force is equal in both directions because it is a double-rod cylinder. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. The 1/8" port and 12mm rod ensure consistent push and pull values.
No. The adjustable air cushions only decelerate the piston near the stroke ends; they do not lock the position. If air is lost, the load will drift. For secure holding, you must add an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.