Airtac SAUD Double Rod Cylinder SAUD32X1000S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X1000S is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 1000mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke1000 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X1000S
The AirTAC SAUD32X1000S is a double-acting, double-rod profile cylinder. A rod exits both ends, meaning both faces use the rod-side area and push and pull force are equal at 345 N each way at 0.5 MPa. The extruded aluminium profile barrel is shorter than an ISO 15552 cylinder of the same 32 mm bore. The 1/8" port and M10x1.25 rod thread are fixed by the bore.
The -S suffix denotes a built-in piston magnet for CMSG, DMSG, or EMSG switches. The 1000 mm stroke is the maximum standard for this 32 mm bore, so external guides are recommended to prevent rod bending under side loads. Based on the 0.5 MPa output, the safe working load is roughly 207 N, yielding a vertical lift capacity of about 18 kg with a 2:1 safety margin.
Airtac SAUD Double Rod Cylinder SAUD32X1000S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X1000S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X1000S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X1000S Is Used
Synchronized Transfer
Drives two parallel pick-and-place arms from one piston, ensuring perfectly matched timing without external linkages.
Dual-Sensor Cam Tracking
Uses the protruding back rod to trip a CMSG or DMSG switch, providing a distinct end-of-stroke confirmation for automation logic.
Anti-Twist Clamping
Applies equal 345 N clamping force in both directions without rotational drift, ideal for holding delicate components during machining.
Is the Airtac SAUD Double Rod Cylinder SAUD32X1000S the Right Cylinder?
This 32 mm bore delivers 345 N equal force both ways. If less power is needed, there is no smaller standard SAUD bore. If more force is required, step up to the 40 mm bore which provides 528 N each way. Choose a double-rod unit when your task demands anti-rotation guidance, twin tooling, or a back-end sensor cam. Mounting is limited to Basic, FA, and LB styles, matching the AirTAC SC series. At the 1000 mm maximum standard stroke, you must use external guides to manage side loads and prevent rod bending. The -S magnet allows position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X1000S FAQ
Because it is a double-rod cylinder, the force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. It uses a 1/8" port.
No, a plain cylinder drifts without live air, as the adjustable cushion only decelerates near stroke end. For a held load, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X1000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.