Airtac SAUD Double Rod Cylinder SAUD32X110
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X110 is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X110
The AirTAC SAUD32X110 is a double-acting, double-rod profile cylinder. A 12 mm rod exits both ends of the hard-anodized aluminum barrel, meaning both faces use the rod-side piston area. This yields equal push and pull force of 345 N each way at 0.5 MPa. The extruded profile body is notably shorter than a standard ISO 15552 unit of the same 32 mm bore.
This model features a 1/8 inch port, M10x1.25 rod threads, and adjustable 21 mm air cushions at both ends. Because this SKU lacks the -S magnet suffix, it cannot accept CMSG or DMSG sensors. Based on the 345 N output, the computed safe working load is roughly 207 N, which translates to a vertical lift capacity of about 18 kg with a 2:1 safety margin.
Airtac SAUD Double Rod Cylinder SAUD32X110 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X110 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X110
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X110 Is Used
Twin-Tool Stamping
Drives two small marking punches simultaneously from opposite rod ends to imprint parts on a conveyor.
Anti-Rotation Transfer
Moves a delicate electronics pick-head between stations with built-in torsional stability from the dual rods.
Dual-End Ejector
Pushes a completed part out of a fixture while the back rod trips a mechanical flag at the same time.
Is the Airtac SAUD Double Rod Cylinder SAUD32X110 the Right Cylinder?
Choose this 32 mm bore when you need 345 N of equal force in both directions. If your application requires less thrust, dropping down is not an option within this series as 32 mm is the smallest available bore. If you need more power, step up to the 40 mm bore which provides 528 N each way at 0.5 MPa. The dual rods provide inherent anti-rotation guidance and allow driving two tools simultaneously. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. At a 110 mm stroke, side loads are minimal, but always guide the load externally for longer strokes. Remember that this non-magnetic SKU cannot host a reed switch.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X110 FAQ
The force is equal in both directions because of the double-rod design. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. The 1/8 inch port supplies air to both chambers.
No, a plain double-rod cylinder drifts when air pressure is lost or the valve is centered. The adjustable 21 mm cushions only decelerate the piston near the stroke ends. Use an external rod lock or pilot-operated check valve for load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.