Airtac SAUD Double Rod Cylinder SAUD32X110S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X110S is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SAUD Double Rod Cylinder SAUD32X110S
The AirTAC SAUD32X110S is a double-acting, double-rod profile cylinder. A 12mm rod exits both ends of the hard-anodized extruded aluminum barrel, meaning both faces use the rod-side area. Output force is equal in both directions, delivering 345 N each way at 0.5 MPa. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG switches.
This profile design is shorter than an ISO 15552 cylinder of the same 32mm bore. The 1/8" port and M10x1.25 rod thread keep the footprint compact. Based on the 345 N output, the safe working load is roughly 207 N, which translates to a vertical lift capacity of about 18 kg with a 2:1 safety margin. Viton H seals can raise the operating temperature to 150 C.
Airtac SAUD Double Rod Cylinder SAUD32X110S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X110S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X110S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X110S Is Used
Synchronized Transfer
Drives two parallel pick-and-place fingers simultaneously from one piston, keeping horizontal part transfers perfectly aligned without twist.
Dual-End Sensing
Uses the protruding back rod to trip an external limit switch or carry a CMSG sensor cam, confirming mid-stroke position in tight assembly cells.
Anti-Rotation Clamping
Applies 345 N of clamping pressure through a non-rotating fixture, preventing workpiece drift during light machining or bonding tasks.
Is the Airtac SAUD Double Rod Cylinder SAUD32X110S the Right Cylinder?
Choose this 32mm bore if you need 345 N of equal push and pull force. Sizing down is not possible as 32mm is the smallest bore, but sizing up to the 40mm bore yields 528 N each way at 0.5 MPa. A double-rod design is the right call for anti-rotation guidance, driving twin tooling, or mounting a sensor cam on the back rod. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. The 110mm stroke is under the 300mm threshold, so side-load guide requirements are minimal. The included magnet supports CMSG, DMSG, and EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X110S FAQ
Because the 12mm rod exits both ends, the force is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. The 1/8" port supplies air to both chambers.
No, a plain double-rod cylinder drifts without live air. The adjustable 21mm cushions only decelerate the piston near stroke end. To hold a load securely, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.