Airtac SAUD Double Rod Cylinder SAUD32X120
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X120 is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 120mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke120 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X120
The AirTAC SAUD32X120 is a double-acting, double-rod profile cylinder. A 12mm rod exits both ends, meaning both faces use the rod-side piston area. This yields equal push and pull force of 345 N each way at 0.5 MPa. The extruded hard-anodized aluminum barrel keeps the unit shorter than an ISO 15552 cylinder of the same 32mm bore.
This SKU has no internal magnet, so it cannot carry CMSG or DMSG sensors. It features a 1/8 inch port, M10x1.25 rod threads, and 21mm adjustable air cushions at both ends. Based on the 345 N output, the safe working load is roughly 207 N, translating to a vertical lift capacity of about 18 kg with a 2:1 safety margin.
Airtac SAUD Double Rod Cylinder SAUD32X120 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X120 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X120
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X120 Is Used
Twin-Tool Transfer
Drives two synchronized pick-and-place heads from opposite rod ends for balanced inline component transfer.
Anti-Rotation Lift
Lifts small delicate assemblies under 18 kg without twisting, using the dual rods for strict linear guidance.
Cam Trip Mechanism
Uses the extended back rod to physically trip a mechanical limit switch or operate an external cam assembly.
Is the Airtac SAUD Double Rod Cylinder SAUD32X120 the Right Cylinder?
Choose this 32mm bore if you need compact anti-twist guidance or twin-tool drive. It outputs 345 N both ways at 0.5 MPa. Sizing up, the 40mm bore provides 528 N; sizing down is not available as 32mm is the minimum. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. For the 120mm stroke, external guide rails are advised to prevent side-load binding. Because this SKU lacks the -S magnet option, it cannot support magnetic sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X120 FAQ
Force is equal in both directions because a rod exits both ends. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. The 1/8 inch port supplies air to both chambers.
No. The air cushions only decelerate the piston near the stroke ends; they do not lock the load. If air is lost, the piston drifts. Use an external rod lock or pilot-operated check valve for secure load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X120
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.