Airtac SAUD Double Rod Cylinder SAUD32X190S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X190S is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 190mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke190 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X190S
The AirTAC SAUD32X190S is a 32 mm bore double-acting profile cylinder with a 190 mm stroke. A piston rod protrudes from both end caps, meaning the push and pull output forces are identical at 345 N each way at 0.5 MPa. The extruded aluminum barrel keeps the body shorter than an ISO 15552 unit of the same bore. This -S variant includes a piston magnet for position sensing.
Because both faces share the same rod-side area, you never get a larger single-rod push value. The twin rods provide rigid anti-rotation guidance and let you mount a sensor cam on the back rod. Based on the 345 N output, the safe working load is roughly 207 N, translating to a vertical lift capacity of about 18 kg with a 2:1 safety margin. The 1/8 inch port feeds air to chambers sealed by standard TPU, with a Viton H option for 0-150 C heat.
Airtac SAUD Double Rod Cylinder SAUD32X190S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X190S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X190S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X190S Is Used
Twin-Tool Transfer
Drives two synchronized pick-and-place grippers from one piston, keeping cycle times identical on both ends.
Non-Rotating Gauge
Advances a measuring probe without angular drift, relying on the dual rods for strict anti-twist guidance.
Cam-Trip Switching
Uses the extended back rod to physically trip a limit switch or carry a sensor cam in tight machinery.
Is the Airtac SAUD Double Rod Cylinder SAUD32X190S the Right Cylinder?
Choose this 32 mm bore delivering 345 N equal force when you need synchronized motion or anti-twist stability. If you need less force, the smaller bore is unavailable in this series, so look at other AirTAC profiles. If you need more power, step up to the 40 mm bore which yields 528 N each way. Mounting is limited to Basic, FA flange, and LB foot styles compatible with the AirTAC SC series. With a 190 mm stroke, side loads are moderate, but always use external guide rails for heavy off-center loads. The -S magnet supports CMSG, DMSG, and EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X190S FAQ
The force is equal in both directions because rods exit both ends. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. The 1/8 inch port feeds the chambers, and the rod-end thread is M10x1.25.
No, a plain double-rod cylinder drifts without live air; the adjustable 21 mm cushions only decelerate near stroke end. For load holding, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X190S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.