Airtac SAUD Double Rod Cylinder SAUD32X200S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X200S is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X200S
The AirTAC SAUD32X200S is a double-acting, double-rod profile cylinder. A 12 mm rod exits both ends, meaning both faces use the rod-side piston area. This yields exactly 345 N of output force at 0.5 MPa in both directions. The extruded aluminium barrel keeps the body shorter than a standard ISO 15552 unit of the same 32 mm bore. It features a 1/8 inch port and M10x1.25 rod threads.
Because the rod protrudes at the back, you can mount a switch cam directly on it for end-of-stroke signaling. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG sensors. Based on the 345 N figure, the safe working load is roughly 207 N, which translates to a vertical lift capacity of about 18 kg with a 2:1 safety margin.
Airtac SAUD Double Rod Cylinder SAUD32X200S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X200S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X200S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X200S Is Used
Synchronized Transfer
Drives two parallel pick-and-place grippers simultaneously with equal push and pull force, ensuring parts stay aligned during horizontal transfer.
Anti-Twist Lift
Lifts small electronic jigs vertically without rotational drift, as the twin rods prevent the piston plate from twisting under offset loads.
Cam-Triggered Sorting
Uses the rear rod extension to physically trip a mechanical limit switch or carry a magnetic sensor cam for precise conveyor sorting gates.
Is the Airtac SAUD Double Rod Cylinder SAUD32X200S the Right Cylinder?
When sizing this unit, the 32 mm bore yields 345 N both ways. If your application needs less force, the smaller 32 mm bore is already the minimum available; if you need more, step up to the 40 mm bore which provides 528 N. Choose this double-rod configuration when you need anti-rotation guidance, want to drive two tools at once, or require back-end sensing. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. At a 200 mm stroke, side loads are moderate, but always use external guide rails to prevent binding. The -S magnet allows solid state or reed switch integration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X200S FAQ
The force is equal in both directions because the 12 mm rod exits both ends. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. It operates on a 1/8 inch port.
No, a plain double-rod cylinder drifts without live air. The adjustable 21 mm cushions only decelerate the piston near the end caps. For secure load holding, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.