Airtac SAUD Double Rod Cylinder SAUD32X30
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X30 is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X30
The AirTAC SAUD32X30 is a double-acting, double-rod profile cylinder featuring a 32mm bore and 30mm stroke. Because a rod exits both ends, the push and pull forces are identical, delivering 345 N each way at 0.5 MPa. The extruded aluminum barrel makes it shorter than an ISO 15552 cylinder of the same bore.
This twin-rod design provides anti-rotation guidance and allows driving two tools at once. Based on the 345 N output, the safe working load is roughly 207 N, translating to a vertical lift capacity of about 18 kg with a 2:1 safety margin. The 1/8" port and M10x1.25 rod thread keep the footprint compact.
Airtac SAUD Double Rod Cylinder SAUD32X30 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X30 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X30
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X30 Is Used
Gripper Sync
Drives opposing gripper jaws simultaneously with equal force, ensuring parts are centered without twisting during transfer.
Twin Stamping
Mounts two small marking tools on opposite rod ends to hit both sides of a workpiece in one synchronized motion.
Short Press
Provides a stable 30mm stroke for seating small electronic components, using the equal push-pull force to prevent binding.
Is the Airtac SAUD Double Rod Cylinder SAUD32X30 the Right Cylinder?
Choose this 32mm bore model delivering 345 N both ways when you need synchronized motion or anti-twist stability in a tight space. If your project requires less force, there is no smaller standard SAUD bore. If you need more power, step up to the 40mm bore for 528 N each way. Mounting is limited to Basic, FA flange, and LB foot styles, compatible with the AirTAC SC series. Since this SKU lacks the -S magnet, it cannot accept CMSG or DMSG sensors. For external guidance, note that any stroke over 300mm requires a side-load guide to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X30 FAQ
The force is equal in both directions because of the double-rod design. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
No, a plain cylinder drifts without live air. The adjustable 21mm air cushions only decelerate the piston near stroke end. For load holding, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.