Airtac SAUD Double Rod Cylinder SAUD32X35
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X35 is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 35mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X35
The AirTAC SAUD32X35 is a double-acting, double-rod profile cylinder. A 12 mm rod exits both ends, meaning push and pull forces are equal at 345 N each way at 0.5 MPa. The extruded aluminium barrel is shorter than an ISO 15552 cylinder of the same 32 mm bore.
This SKU has no internal magnet, so it cannot accept CMSG or DMSG sensors. The 1/8" port and M10x1.25 rod thread are fixed by the bore. Based on the 345 N output, the safe working load is roughly 207 N, equating to a vertical lift capacity of about 18 kg with a 2:1 safety margin.
Airtac SAUD Double Rod Cylinder SAUD32X35 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X35 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X35
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X35 Is Used
Gripper Actuation
Drives a pneumatic gripper where equal push and pull force ensures consistent jaw pressure during part clamping.
Twin Tool Drive
Powers two small forming tools simultaneously from opposite rod ends, keeping cycle times synchronized.
Non-Rotating Ejector
Ejects light machined parts from a fixture, using the dual rods to prevent piston twist during retraction.
Is the Airtac SAUD Double Rod Cylinder SAUD32X35 the Right Cylinder?
Choose this 32 mm bore (345 N both ways) if you need synchronized motion or anti-twist guidance. Step down if your load is lighter, or step up to the 40 mm bore (528 N) for more power. Mounting is limited to Basic, FA flange, and LB foot, matching the AirTAC SC series. With a 35 mm stroke, side loads are minimal, but always guide external loads to prevent binding. Note that this plain SKU lacks the -S magnet, so rear rod switch cam sensing is impossible here.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X35 FAQ
Because it is a double-rod cylinder, the force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. The 1/8" port supplies air to both chambers equally.
No. The adjustable 21 mm cushions only decelerate the piston near the end caps; they do not lock. If you need to hold a load on air loss, you must add an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.