Airtac SAUD Double Rod Cylinder SAUD32X375
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X375 is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 375mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke375 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X375
The AirTAC SAUD32X375 is a double-acting, double-rod profile cylinder with a 32 mm bore and 375 mm stroke. A 12 mm rod exits both ends, meaning both faces use the rod-side area. Output is equal both ways at 345 N at 0.5 MPa. The extruded aluminum barrel keeps the unit shorter than an ISO 15552 cylinder of the same bore.
This SKU has no internal magnet (-S required for sensing), so it cannot host CMSG or DMSG switches. The 1/8" port feeds a 30-800 mm/s speed range. For design loads, figure a safe working load around 207 N, or a vertical lift capacity near 18 kg with a 2:1 margin. A Viton H seal option raises operating temperature to 150 C.
Airtac SAUD Double Rod Cylinder SAUD32X375 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X375 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X375
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X375 Is Used
Twin Tool Drive
Drives two opposing forming tools simultaneously with matched 345 N force on both strokes.
Anti-Rotation Transfer
Moves a 375 mm gauging fixture without twist thanks to the dual-rod guidance.
Compact Clamping
Clamps parts in a tight cell where the short profile barrel saves valuable space.
Is the Airtac SAUD Double Rod Cylinder SAUD32X375 the Right Cylinder?
Select this 32 mm bore if you need 345 N of equal push and pull force. Sizing down is not an option, but sizing up to the 40 mm bore yields 528 N both ways if your payload increases. A double rod is the right call for anti-rotation guidance or driving twin tooling. Mounting is limited to Basic, FA, and LB styles compatible with the AirTAC SC series. Because the stroke is 375 mm, add external guides to prevent rod bending under side loads. This plain version lacks a magnet, so it cannot support sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X375 FAQ
Because the 12 mm rod exits both ends, force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. The 1/8" port feeds a speed range of 30-800 mm/s.
No. The adjustable 21 mm cushions only decelerate the piston near stroke end. For load holding on air loss, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X375
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.