Airtac SAUD Double Rod Cylinder SAUD32X475S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X475S is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 475mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke475 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X475S
The AirTAC SAUD32X475S is a double-acting, double-rod profile cylinder. A rod exits both ends, meaning push and pull forces are identical at 345 N each way at 0.5 MPa. The extruded hard-anodized aluminum barrel keeps the unit shorter than an ISO 15552 cylinder of the same bore. This -S variant includes a piston magnet for position sensing.
Because both faces use the rod-side area, the output is perfectly symmetrical. The safe working load is roughly 207 N, and it can vertically lift about 18 kg with a 2:1 safety margin. The 1/8" port and M10x1.25 rod thread match the 32 mm bore standard. A 21 mm adjustable air cushion decelerates the piston at each end, while a Viton H seal option raises the operating ceiling to 150 C.
Airtac SAUD Double Rod Cylinder SAUD32X475S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X475S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X475S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X475S Is Used
Twin Tool Transfer
Drives two synchronized workheads from one piston, keeping machining pressure identical on both extension and retraction.
Back-Rod Switch Cam
Uses the protruding rear rod to trip a CMSG or DMSG sensor, confirming mid-stroke position without front-end clutter.
Anti-Twist Lift
The dual rods prevent piston rotation during vertical lifts, ensuring precise linear guidance for light assemblies.
Is the Airtac SAUD Double Rod Cylinder SAUD32X475S the Right Cylinder?
Select this 32 mm bore model when a task demands equal force in both directions, such as anti-rotation guidance or driving twin tooling simultaneously. The back rod can also carry a switch cam to trip a sensor. It yields 345 N at 0.5 MPa; if you need less force, consider a smaller bore, or step up to the 40 mm bore for 528 N. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. At a 475 mm stroke, external guides are strongly recommended to prevent rod bending and absorb side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X475S FAQ
The force is equal both ways because of the double-rod design. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa on both the push and pull strokes.
No. A plain cylinder drifts when air is lost or the valve is centered, as the air cushion only decelerates near the stroke end. For a held load, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X475S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.