Airtac SAUD Double Rod Cylinder SAUD32X60
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X60 is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X60
The AirTAC SAUD32X60 is a double-acting, double-rod profile cylinder. A 12mm rod exits both ends of the hard-anodized extruded aluminum barrel, meaning both faces use the rod-side area. Output is equal in both directions at 345 N each way at 0.5 MPa. The unit is shorter than an ISO 15552 cylinder of the same bore and uses a 1/8 inch port.
This compact design excels at non-rotating, synchronized tasks. The rear rod can drive twin tooling or carry a switch cam. With a 345 N output at 0.5 MPa, expect a safe working load around 207 N or a vertical lift capacity near 18 kg with a 2:1 margin. Note this SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors.
Airtac SAUD Double Rod Cylinder SAUD32X60 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X60 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X60
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X60 Is Used
Twin-Tool Transfer
Drives two synchronized grippers at once for balanced part shuttling without rotational twist.
Equal-Force Stamping
Applies 345 N of identical clamping pressure on both the extend and retract strokes for light deburring.
Compact Sorting Diverter
Fits into tight machinery profiles to push packages symmetrically from a central pivot point.
Is the Airtac SAUD Double Rod Cylinder SAUD32X60 the Right Cylinder?
Choose this 32mm bore when you need 345 N of equal push and pull force at 0.5 MPa. If your project needs less force, step down to a smaller bore; if you need more, step up to the 40mm bore yielding 528 N both ways. A double rod is the right call for anti-rotation guidance or twin-tool duty. Mounting is limited to Basic, FA flange, and LB foot styles matching the AirTAC SC series. For any stroke over 300mm, add external guide rails to handle side loads. Because this specific SKU has no magnet, you cannot mount sensors; select a -S variant if switch tracking is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X60 FAQ
Because the 12mm rod exits both ends, the force is equal in both directions. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. The 1/8 inch port supplies air to both chambers.
No. The adjustable 21mm air cushions only decelerate the piston near the stroke ends; they do not act as a brake. For load holding on air loss, you must fit an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.