Airtac SAUD Double Rod Cylinder SAUD32X95
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X95 is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 95mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke95 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X95
The AirTAC SAUD32X95 is a double-acting, double-rod profile cylinder with a 32 mm bore and 95 mm stroke. Because a rod exits both ends, the push and pull forces are equal at 345 N each way at 0.5 MPa. The extruded aluminum barrel makes it shorter than an ISO 15552 cylinder of the same bore. It uses a 1/8 inch port and has an M10x1.25 rod thread.
This twin-rod design provides anti-rotation guidance and lets you mount tooling on both faces simultaneously. Without the -S suffix, this specific SKU lacks a magnet and cannot host CMSG or DMSG sensors. Based on the 345 N output, the safe working load is roughly 207 N, translating to a vertical lift capacity of about 18 kg with a 2:1 safety margin.
Airtac SAUD Double Rod Cylinder SAUD32X95 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X95 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X95
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X95 Is Used
Synchronized Transfer
Drives two pick-and-place fingers simultaneously from one piston, ensuring perfectly synchronized part transfer without torsional twist.
Twin-Spindle Drilling
Carries dual machining heads on opposite rod ends to perform mirrored drilling operations on a workpiece in a single compact motion.
Balanced Vertical Lift
Lifts small 18 kg electronic fixtures with equal force on the upstroke and downstroke, preventing gravity-induced acceleration drops.
Is the Airtac SAUD Double Rod Cylinder SAUD32X95 the Right Cylinder?
Choose this 32 mm bore if your application demands equal 345 N force in both directions and strict anti-twist stability. For higher loads, step up to the 40 mm bore delivering 528 N; for lighter duty, drop down to a smaller profile. A double-rod configuration is ideal when driving twin tools or needing a back rod to trip a switch, though you must add the -S option for magnetic sensing. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. At a 95 mm stroke, side loads are minimal, but always guide the load externally for longer strokes.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X95 FAQ
The force is equal in both directions because it is a double-rod cylinder. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. The 1/8 inch port supplies air to both chambers equally.
No, a plain cylinder drifts without live air; the adjustable 21 mm cushions only decelerate near the stroke end. For vertical load holding, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X95
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.