Airtac SAUD Double Rod Cylinder SAUD32X950S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X950S is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 950mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke950 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X950S
The AirTAC SAUD32X950S is a double-acting, double-rod profile cylinder. A rod exits both ends, so the push and pull forces are equal at 345 N each way at 0.5 MPa. The extruded hard-anodized aluminum barrel makes it shorter than an ISO 15552 cylinder of the same bore.
This 32 mm bore unit uses a 1/8 inch port and includes a built-in magnet for CMSG, DMSG, or EMSG switches. With a 950 mm stroke, external guides are essential to prevent rod bending under side loads. Based on the 0.5 MPa output, the safe working load is about 207 N, allowing a vertical lift of roughly 18 kg with a 2:1 margin.
Airtac SAUD Double Rod Cylinder SAUD32X950S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X950S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X950S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X950S Is Used
Twin Tool Transfer
Drives two parallel pickers simultaneously from one piston, keeping strokes synchronized without torsional twist.
Dual End Sensing
Uses the protruding back rod to trip a CMSG or DMSG switch in tight spaces where front-end sensors would collide.
Long Stroke Gauging
Pushes a caliper probe across a 950 mm bed; the equal pull force retracts the gauge smoothly without sagging.
Is the Airtac SAUD Double Rod Cylinder SAUD32X950S the Right Cylinder?
Choose this 32 mm bore model delivering 345 N both ways when you need anti-rotation guidance or twin tooling. Sizing up, the 40 mm bore gives 528 N each way; sizing down is not available as 32 mm is the smallest. Mounting is limited to Basic, FA, and LB styles matching the AirTAC SC series. The -S suffix enables electronic or reed sensing. At 950 mm stroke, always support the load with external guides to avoid rod deflection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X950S FAQ
The force is equal in both directions because both faces carry a rod. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. The unit features a 1/8 inch port and adjustable 21 mm cushions at both ends.
No, a plain double-rod cylinder drifts without live air. The cushions only decelerate near the end of stroke. For load holding, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X950S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.